Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

The power of a tiger with the swiftness of a cat, the nimble Tiger Cat® II combines the best of both worlds. Making full use of its compact footprint and robust engine, this easily adjustable and extremely durable machine gets into, around and out of tight spaces quickly—putting you on the path toward increased profitability.

48", 52" OR 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Product Dimensions

• 48″ Tiger Cat
• Length: 80″
• Width (chute down): 60.5″
• Width (chute in transport position): 49.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,175 lbs
• 52″ Tiger Cat
• Length: 80″
• Width (chute down): 64.5″
• Width (chute in transport position): 53.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,175-1,180 lbs
• 61″ Tiger Cat
• Length: 80″
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,257-1,277 lbs

GENERAL

• Total Fuel Capacity: 9.5 gallons
• Drive Tires:
• 24″ x 9.5″-12″ (48″ and 52″ models)
• 24″ x 12″-12″ (61″ model)
• Caster Tires: 13″ x 6.5″-6″, flat-free
• Seat: 4-point iso-mounted mid-back mounted on operator-suspension platform

DRIVE SYSTEM

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear 12 cc
• Motors: Parker 14.5 ci
• Forward Ground Speed: 12 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Foot-operated pedal

DECK

• Cutting Widths: Available in 48″, 52″, and 61″
• Type: Velocity Plus™
• Cutting Height: Adjustable from 1″ to 5″ in .25″ increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings.

Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

It’s time for you to rise to the top of the food chain and tame turf with the Turf Tiger II™, a machine that’s tougher than any job you can throw at it. Engineered for superior durability, productivity and comfort, the Turf Tiger II gives you the edge over whatever nature throws at you while leaving you ready to take on the next challenge.

 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Product Dimensions:

• 61″ Turf Tiger Gas / Propane / Diesel
• Length: 85.5″
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS down): 46.5″ / 52.5″
• Height (ROPS up): 68″
• Weight: 1,496-1,538 lbs (Gas / Propane) / 1,606 lbs (Diesel) / 1,709 lbs (Diesel)

GENERAL

• Total Fuel Capacity:
• 12 gallons (Gas/Diesel)
• 33.5 lb (LP)
• Drive Tires:
• 26″ x 12″-12″ (61″ and 72″)
• 26″ x 9.5″-12″ (52″)
• Caster Tires: 13″ x 6.5″-6″
• Seat: 4-point iso-mounted torsion-spring suspension seat

DRIVE SYSTEM

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear: 16 cc
• Motors: Parker: 18 ci
• Forward Ground Speed:
• 12 mph (Gas/LP)
• 10 mph (Diesel)
• Reverse Ground Speed: 6 mph
• Parking Brake: Adjustable foot-operated pedal. AUSCO disc brakes.

DECK

• Cutting Widths: 61″
• Type: Velocity Plus™
• Cutting Height: Adjustable from 1.5″ to 6″ in .25″ increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings.

Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Engines

Kohler Command PRO CV224 Engines

With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.

Features include:

• Torque output: 11.0 ft-lbs
• 3-year limited commercial warranty
• Enjoy effortless starts thanks to our Easy-Pull™ technology
• Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
• Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
• Cast-iron cylinder liners add durability and engine protection

Specifications:

Dimensions & Weight

• Length – Transport (handles in upright transport position): 41″ / 44″
• Length – Minimum (handles in highest operating position): 66″ / 69″
• Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
• Tracking Width: 28.75″
• Width (with discharge chute): 36.75″
• Width (with discharge block-off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Maximum Operating: 45.25″
• Height – Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs. / 233 lbs.
• Operating Weight – Mulching: 214 lbs. / 227 lbs.
• Operating Weight – Discharging: 213 lbs. / 226 lbs.

General Specifications

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
• Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel

Drive System

• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 30″
• Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
• Cutting Height: 1.5″ to 5″ in 0.25″ increments
• Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
• Deck Lift: Hand lever, single-point adjustment
• Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)

Discharge, Mulch, & Bagging

• Standard Discharge, Mulch, & Bagging: Yes
• Bag Capacity: 2.5 Bushels

Description:

Because every home deserves stripes, the Liberty® Z is designed and manufactured to deliver a top-of-the-line experience at a homeowner price point. A professionally-constructed mower, fit for your own lawn. The Liberty Z gives more people the chance to see why Scag® machines are Simply the Best.

Other manufacturers opt for less expensive, smaller-capacity, nonadjustable, “disposable” clutches. Not Scag®. Scag PTO clutch brakes are manufactured by Ogura, the world’s best manufacturer of electromagnetic clutches, providing smooth blade engagements and fast blade stops.

All Ogura clutches feature an adjustable air gap. What does that mean to you? It means that when most clutches are worn out and must be replaced at a significant cost to YOU, the Ogura clutch can be easily adjusted to bring it back into specification (your Scag dealer can perform this adjustment).

These clutches also feature industry-leading torque values (the holding power that links the engine to the cutter-deck drive system) to ensure solid drive to the cutter deck and no slipping in heavy conditions.

Features:

Ogura PTO Clutch Brake

• Strong, Adjustable Clutch for Long Life: The Ogura GT1 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck with 74 ft. lb. of holding strength. It features an adjustable air gap for increased durability and longevity.

Deep, Fabricated, and Welded Cutter Decks

• Heavy-Duty Hero Cutter Deck: Designed for superior quality-of-cut, the deep, fabricated deck handles large volumes of grass at high speeds. Heavy-duty aluminum, sealed ball bearing blade-drive spindles ensure reliable performance season after season.

High-Strength Steel Frame

• Solid Design for Years of Dependable Service: The tubular-steel main frame offers unmatched strength and durability for long-term use.

Low-Maintenance Mower Design

• More Uptime: Reduced grease points for increased operator convenience and ease of ownership, minimizing maintenance needs.

Proven Transaxles

• Speeds Up To 7 MPH: The Liberty Z features proven dual hydro transaxles (Tuff Torq TZ450, Hydro-Gear ZT-2800, or ZT-3100, depending on the model) for smooth and solid power delivery to the drive wheels.

Contoured, Bolstered, High-Back Seat

• Ride in Comfort: Ultra-comfortable, adjustable seat (with tools) featuring armrests* for improved comfort. *Armrests are standard on 48″, 52″, and 61″ models; optional for 36″ and 42″ models.

Easy Foot-Pedal Deck Lift

• Easy Up, Easy Down: Spring-assisted foot-pedal cutter-deck lift makes raising and lowering the cutter deck smooth and effortless.

Powerful and Efficient Engine Options

• Reliable Power, Up To 27 HP: A range of proven air-cooled, V-twin engine options available to meet various performance needs.

Specification:

• Description: 42″ Hero Cutter Deck, 22 HP Kohler® 7000 Series™ PRO – 725 cc displacement

Product Dimensions

• Length: 68.5″
• Width (chute down): 54.5″
• Width (chute in transport position): 43″
• Height: 41″
• Weight: 595 lb

General Specifications

• Total Fuel Capacity: 5.5 gallons
• Drive Tires: 20″ x 10″-8″
• Caster Tires: 11″ x 6″-5″
• Seat: Padded with armrests, forward and back adjustment (tools required)
• Drive System Type: Tuff Torq TZ450 Transaxle
• Pumps: Internal Pump: 10 cc
• Motors: Internal Motor: 10cc (Tuff Torq), 16 cc (Hydro-Gear)
• Forward Ground Speed: 7 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 42″
• Type: Heavy-Duty Hero Cutter Deck
• Cutting Height: 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Foot-operated pedal
• Construction: Dual-plate cutter deck constructed of 2 steel plates with a reinforcement plate at cutter deck spindles
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement:
• Ogura GT1 (74 ft-lb) for 36″, 42″, 48″, and 52″ models
• Ogura GT2 (108 ft-lb) for 61″ models
• Adjustable air-gap for extended life

Description:

All business—even at home—the Freedom Z® is perfect for landscapers needing a machine that can go the distance or for the pro-at-home who owns a large-acreage lot. Commercial-quality through and through, this machine is comfortable anywhere the job needs to be done.

Features:

• PTO Clutch Brake:
• Provides excellent starting and stopping power for the cutter deck.
• Offers 74 ft. lb. of holding strength.
• Adjustable air gap for enhanced durability.
• Cutter Deck:
• Deep, fabricated, and welded design for handling large amounts of grass at higher speeds.
• Heavy-duty Hero Cutter Deck construction for quality-of-cut.
• Aluminum, sealed ball bearing, blade-drive spindles for reliable performance.
• Frame:
• Tubular-steel main frame for unmatched strength and longevity.
• Transaxles:
• Hydro-Gear ZT-2800 Transaxles for speeds up to 8 MPH.
• Dual hydro transaxles with all-metal gears and spin-on oil filters.
• Large cooling fans to keep temperatures low and extend component life.
• Maintenance:
• Low-maintenance design with fewer grease points for increased operator convenience and uptime.
• Seat:
• Contoured, bolstered, high-back seat for improved comfort.
• Adjustable with tools and features armrests for added comfort during operation.
• Deck Lift:
• Easy foot-pedal deck lift with spring assistance for smooth raising and lowering of the cutter deck.
• Engine Options:
• Reliable power options up to 24 HP.
• Available with 22 hp and 24 hp Kohler® 7000 Series engines.
• PRO Performance filtration for smooth and consistent power delivery.

Specification:

• Engine: 26 HP Kohler® 7000 Series™ PRO – V-Twin, air-cooled engine.
• Cutter Deck: 52″ Hero Cutter Deck with dual-plate construction using 2 steel plates and a reinforcement plate at cutter deck spindles.
• Blade Engagement: Ogura GT1 PTO Clutch Brake with 74 ft lb holding strength and adjustable air-gap for extended life.
• Cutting Width: 52″
• Cutting Heights: Adjustable from 1.5″ to 4.5″ in 0.25″ increments.
• Deck Lift: Foot-operated pedal for easy adjustment.
• Drive System: Hydro-Gear ZT2800 Transaxle with internal pump (10 cc) and motor (16 cc).
• Speeds: Forward ground speed up to 8 mph, reverse ground speed up to 5 mph.
• Fuel Capacity: 6.5 gallons.
• Tires: Drive tires 20″ x 10″-10″, caster tires 11″ x 6″-5″.
• Seat: Padded with armrests, adjustable forward and back (tools required).
• Dimensions:
• Length: 73″
• Width (chute down): 64.5″
• Width (chute in transport position): 53″
• Height: 60″
• Weight: 765 lb

Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

All business—even at home—the Freedom Z® is perfect for landscapers needing a machine that can go the distance or for the pro-at-home who owns a large-acreage lot. Commercial-quality through and through, this machine is comfortable anywhere the job needs to be done.

Features:

• PTO Clutch Brake:
• Provides excellent starting and stopping power for the cutter deck.
• Offers 74 ft. lb. of holding strength.
• Adjustable air gap for enhanced durability.
• Cutter Deck:
• Deep, fabricated, and welded design for handling large amounts of grass at higher speeds.
• Heavy-duty Hero Cutter Deck construction for quality-of-cut.
• Aluminum, sealed ball bearing, blade-drive spindles for reliable performance.
• Frame:
• Tubular-steel main frame for unmatched strength and longevity.
• Transaxles:
• Hydro-Gear ZT-2800 Transaxles for speeds up to 8 MPH.
• Dual hydro transaxles with all-metal gears and spin-on oil filters.
• Large cooling fans to keep temperatures low and extend component life.
• Maintenance:
• Low-maintenance design with fewer grease points for increased operator convenience and uptime.
• Seat:
• Contoured, bolstered, high-back seat for improved comfort.
• Adjustable with tools and features armrests for added comfort during operation.
• Deck Lift:
• Easy foot-pedal deck lift with spring assistance for smooth raising and lowering of the cutter deck.
• Engine Options:
• Reliable power options up to 24 HP.
• Available with 22 hp and 24 hp Kohler® 7000 Series engines.
• PRO Performance filtration for smooth and consistent power delivery.

Specification:

• Engine: 26 HP Kohler® 7000 Series™ PRO – V-Twin, air-cooled engine.
• Cutter Deck: 52″ Hero Cutter Deck with dual-plate construction using 2 steel plates and a reinforcement plate at cutter deck spindles.
• Blade Engagement: Ogura GT1 PTO Clutch Brake with 74 ft lb holding strength and adjustable air-gap for extended life.
• Cutting Width: 52″
• Cutting Heights: Adjustable from 1.5″ to 4.5″ in 0.25″ increments.
• Deck Lift: Foot-operated pedal for easy adjustment.
• Drive System: Hydro-Gear ZT2800 Transaxle with internal pump (10 cc) and motor (16 cc).
• Speeds: Forward ground speed up to 8 mph, reverse ground speed up to 5 mph.
• Fuel Capacity: 6.5 gallons.
• Tires: Drive tires 20″ x 10″-10″, caster tires 11″ x 6″-5″.
• Seat: Padded with armrests, adjustable forward and back (tools required).
• Dimensions:
• Length: 73″
• Width (chute down): 64.5″
• Width (chute in transport position): 53″
• Height: 60″
• Weight: 765 lb

Description:

The RM 453 T features the state-of-the-art mono-comfort handlebar which provides strength and stability while also allowing for convenient access to the grass bag, easy height adjustment, and compact, foldaway storage. The integrated mulch flap is easily engaged or disengaged with the flip of a switch—no need for a separate mulch plug and the polymer grass bag is direction ally vented to reduce dust exposure to the user. Featuring a lightweight and durable polymer housing and double ball-bearing mounted wheels, the mower is highly manoeuvrable and provides stable, long-lasting performance. The 4-in-1 functionality lets you choose whether to bag, mulch, or side/rear dispense grass clippings. This next-generation mower is built for the long haul and handles with ease and operator comfort.

Features:

• Mono-Comfort Handlebar - The state-of-the-art mono-comfort handlebar allows for quick access to the grass bag as well as easy height adjustment and convenient, foldaway storage.
• Integrated Mulch Flap - The built-in mulch flap is easily engaged or disengaged with the flip of a switch depending on whether the mulching function is being used, eliminating the need for a separate plug.
• Polymer Grass Bag - The polymer grass bag is designed to improve operator comfort and features a closed top and back along with downward angled side vents to reduce dust exposure. In addition, when the grass bag is empty, the indicator is flipped up to indicate the bag is not full. The indicator will flip down when the bag is full.
• Single-Point Height Adjustment - Each mower features seven cutting heights adjusted from a single location.
• 4-in-1 Mower - The 4-in-1 system allows operators to switch between mulching, fabric grass bag collection, or rear or side discharge functions depending on specific need.
• Multi-Blade - The multi-blade provides powerful cutting performance to shred grass into small pieces for a cleaner cut and look to the lawn.
• Double Ball-Bearing Mounted Wheels - The double ball-bearing mounted wheels provide durability and stability for low-maintenance needs along with smooth operation and manoeuvrability.
• Carrying Handles - The integrated carrying handles help users easily lift or tip their mower and can double as eyes for securing the mower during transport.
• Polymer Housing - The robust polymer housing provides lightweight durability for reduced operator fatigue and long-lasting performance.
• Rubberised Soft-Touch Handle - Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods. 
• Ball Bearing Wheels - The sealed ball bearing wheels are designed for long life.

Specifications:

• Power Source: Gas
• Engine: EVC 300
• Displacement: 166 cc
• Drive Type: Traction Drive
• Self-Propelled: Yes
• Speed Range: 0 – 2.2 mph
• Deck Material: Polymer
• Deck Width: 20.9 in.
• Cutting Width: 20.1 in.
• Cutting Height: 1 – 4 in.
• Cutting Height Adjustment: Seven-level Single Point
• Mulch Function: Integrated
• Number of Blades: One Multi-Blade
• Mowing Blade Speed: 2,800 rpm
• Grass Catcher Capacity: 14.5 gal.
• Front Tires: 7.5 in.
• Rear Tires: 7.5 in.
• Weight: 70.5 lbs

Description:

A rugged, fuel-efficient commercial zero-turn machine powered by a 747 cc Kohler EFI engine, delivering 26.5 HP with exceptional throttle response, cold-start reliability, and built-in diagnostics. Ideal for commercial and multi-unit properties

Features:

Engine & Power

• Engine: Kohler ECH749 Command PRO EFI, air-cooled 747 cc V‑Twin
• Power Output: 26.5 HP @ 3,600 RPM
• Torque: 40 ft‑lb
• Fuel System: EFI (Up to 25 % better fuel efficiency)
• Fuel Capacity: 4.7 gal (17.8 L)
• Features: Closed-loop EFI, electronic governor, cold-start capable, oil-sentry system, cast-iron liners

Drive & Handling

• Dual Transmission: Walker Model 7 hydrostatic for precise, independent wheel control
• Drive Features: TOPS oil filtration for longevity, fingertip steering levers
• Forward Speed: Infinitely variable, up to ~7 mph (11 km/h)

Grass Handling & Deck

• Grass Handling System: Integrated Grass Handling System® (GHS) with powerful vacuum, compact design

Deck Options:

• Collection decks: 42", 48"
• Mulching & side-discharge compatible

Construction: 10.5" diameter blower, oscillating PowerFil spout, 10 bushel (12.4 cu ft) catcher

Operator Comfort & Controls

• Seat: Walker Comfort Seat (optional armrests & lights available)
• Controls: Shock-mounted instrument panel with headlights, hour meter, voltmeter, diagnostic/service lights, ignition & horn

Frame & Maintenance

• Frame: Heavy-duty ⅜″ × 2″ welded steel
• Service Access: Tilt-up deck & body for easy service access.
• Protective Features: Commercial air pre-cleaner, oversized two-stage air filter

Specifications:

• Engine: Kohler ECH749
• Fuel System: Electronic Fuel Injection (EFI)
• Cooling System: Air
• Displacement: 747 cc (45.6 cu. in.)
• Max Power: 26.5 HP @ 3600 RPM
• Max Torque: 40 ft-lbs
• Fuel Capacity: 4.7 gal (17.8 liters)
• Seat: Comfort Seat
• Weight:
• Tractor Only: 815 lbs (370 kg)
• Tractor with Deck: 1034 lbs (469 kg)
• Dimensions (with deck):
• Height: 50 in (127 cm)
• Width: 49.25 in (125 cm)
• Length: 93 in (236 cm)

Description:

The RM 453 V variable-speed mower is equipped with stability and convenience of the state-of-the-art mono-comfort handlebar which provides strength and stability while also allowing for convenient access to the grass bag, easy height adjustment, and compact, foldaway storage. The polymer grass bag offers directional venting to reduce dust exposure and the integrated mulch flap is easily engaged or disengaged with the flip of a switch—no need for a separate mulch plug. Get both lightweight manoeuvrability and long-lasting durability thanks to the innovative polymer housing and double ball-bearing mounted wheels. The 4-in-1 functionality for mulching, catching, or side/rear dispensing grass clippings gives this powerhouse mower the versatility users need to meet the unique needs of their lawns.

Features:

• Mono-Comfort Handlebar - The state-of-the-art mono-comfort handlebar allows for quick access to the grass bag as well as easy height adjustment and convenient, foldaway storage.
• Integrated Mulch Flap - The built-in mulch flap is easily engaged or disengaged with the flip of a switch depending on whether the mulching function is being used, eliminating the need for a separate plug.
• Polymer Grass Bag - The polymer grass bag is designed to improve operator comfort and features a closed top and back along with downward angled side vents to reduce dust exposure. In addition, when the grass bag is empty, the indicator is flipped up to indicate the bag is not full. The indicator will flip down when the bag is full.
• Single-Point Height Adjustment - Each mower features seven cutting heights adjusted from a single location.
• 4-in-1 Mower - The 4-in-1 system allows operators to switch between mulching, fabric grass bag collection, or rear or side discharge functions depending on specific need.
• Multi-Blade - The multi-blade provides powerful cutting performance to shred grass into small pieces for a cleaner cut and look to the lawn.
• Double Ball-Bearing Mounted Wheels - The double ball-bearing mounted wheels provide durability and stability for low-maintenance needs along with smooth operation and manoeuvrability.
• Carrying Handles - The integrated carrying handles help users easily lift or tip their mower and can double as eyes for securing the mower during transport.
• Polymer Housing - The robust polymer housing provides lightweight durability for reduced operator fatigue and long-lasting performance.
• Rubberised Soft-Touch Handle - Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods. 
• Ball Bearing Wheels - The sealed ball bearing wheels are designed for long life.

Specifications:

• Power Source: Gas
• Engine: EVC 300
• Displacement: 166 cc
• Drive Type: Vario Drive
• Self-Propelled: Yes
• Speed Range: 0 – 2.9 mph
• Deck Width: 20.9 in.
• Cutting Width: 20.1 in.
• Cutting Height: 1 – 4 in.
• Cutting Height Adjustment: Seven-Level Single Point
• Mulch Function: Integrated
• Number of Blades: One Multi-Blade
• Mowing Blade Speed: 2,800 rpm
• Grass Catcher Capacity: 14.5 gal.
• Front Tires: 7.5 in.
• Rear Tires: 7.5 in.
• Weight: 72.7 lbs

Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

Featuring a comfortable operator platform with first-class suspension that minimizes fatigue, the V-Ride II™ delivers a natural, intuitive and smooth riding position the entire day. With unrivaled performance, stability and durability, this machine helps keep you in tip-top condition to get the job done day after day, year after year.

48", 52" or 61" Cutting Width

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48″, 52″ and 61″ widths. An Advantage Cutter Deck is featured on 32″ and 36″ widths

Scag® cutter decks have always given our competition a serious case of deck envy. Many try to duplicate the performance, but none can match it. The Velocity Plus™ cutter deck is an outstanding performer and delivers beautiful results.

The Velocity Plus™ Cutter Deck provides the unmatched power, precision and performance professionals demand. This revolutionary deck design delivers high-velocity discharge plus a beautiful manicured cut, even at faster ground speeds. A redesigned cutting chamber and massive discharge opening provide even greater cutting performance with maximum clipping dispersal in any conditions.

Strength — Scag’s tough cutter-blade spindles and Tri-Plate construction ensure solid performance and long life. A replaceable trim-side wear pad protects deck from damage.

Productivity — An extra-large discharge opening, paired with the Turbo Baffle, enhances discharge for even clipping dispersal.

Flexibility — The Velocity Plus cuts everything from fine grasses to tough weeds. The Custom-Cut™ Front Baffle System allows you to customize the deck to your individual conditions for even more productivity and higher performance.

Engines:

Kawasaki FT Series Engines

Commercial-Grade Power

The new Kawasaki® FT Series engines with patented Vortical air filtration blaze new trails.

Kawasaki® FT Series engines are designed and built to handle heavy loads. The Vortical air filtration system muscles out grass and debris while large, easy-to-access integrated clean-out ports amp up your efficiency and keep you cutting.

Other features include:

• 90° V-twin
• High-efficiency, centrifugal air intake system
• Dual-element air filtration with reinforced filter
• Large, easy-to-access integrated clean-out ports
• Pressurized lubrication system
• Electronic spark ignition
• Automatic compression release
• Internally vented carburetor with fuel shut-off solenoid
• Cast-iron cylinder liners

Specification:

• Specification - V-Ride II
• General:
• Total Fuel Capacity:
• 5 gallons (32″)
• 6.75 gallons (36″)
• 8 gallons (48″, 52″, and 61″)
• Drive Tires:
• 20″ x 6.5″-10″ (32″)
• 20″ x 8″-10″ (36″)
• 24″ x 9.5″-12″ (48″ and 52″)
• 24″ x 12″-12″ (61″)
• Caster Tires:
• 11″ x 4″-5″ (32″ and 36″)
• 13″ x 5″-6″ (48″ and 52″)
• 13″ x 6.5″-6″ (61″)
• Seat: Extra-large comfort cushion
• Drive System:
• Drive System Type: Dual Pump and Motor
• Pumps:
• Hydro-Gear 10 cc (32″ and 36″)
• Hydro-Gear 12 cc (48″, 52″, and 61″)
• Motors:
• Parker 12 ci (32″ and 36″)
• Parker 14 ci (48″, 52″ and 61″)
• Forward Ground Speed:
• 8.5 mph (32″ and 36″)
• 10.5 mph (48″, 52″ and 61″)
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever
• Deck:
• Cutting Widths: 32″, 36″, 48″, 52″, and 61″
• Type:
• Advantage (32″ and 36″)
• Velocity Plus™ (48″, 52″, and 61″)
• Cutting Height: 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles. 32″ model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement:
• Ogura GT2.5 (150 ft lb) – (32″, 36″, 48″, and 52″)
• Ogura GT3.5 (250 ft lb) – (61″)
• Adjustable air-gap for extended life.
• Length: 69.5″
• Tracking Width: 48″
• Width (Chute Down): 65.25″
• Width (Chute in Transport Position): 53.75″
• Height: 47.25″
• Weight: 1,000-1,022 lb

Description:

48" Hero Cutter Deck, 15 HP Kawasaki® FS600V - electric-start engine

FEATURES:

• Hero™ Cutter Deck: DEEP, FABRICATED, AND WELDED CUTTER DECKS: Heavy-duty Hero Cutter Deck design and construction yield an excellent quality-of-cut. Deep design handles lots of grass at higher speeds. Heavy-duty, aluminum, sealed ball bearing, blade-drive spindles provide reliable performance season after season.
• Ergonomic Control System: Easy Operation, Hour After Hour: Ultra-comfortable, ergonomic controls not only contour to the natural angles of your extended arms, but are placed to keep your hands out of harm's way when mowing next to trees and bushes.
• Easy-Adjust Cutter-Deck Height System: No Tools Needed: Innovative, rider-style height-of-cut adjustment is quick and convenient.
• Heavy-Duty Drive System: Speeds Up To 7 MPH: Dual ZT-2800 transaxles utilize all-metal internal gears for long life and deliver smooth, infinitely variable speed and bi-directional control. Power comes from a 10 cc variable-displacement, seven-piston pump and a 16 cc fixed-displacement, seven-piston motor in each transaxle. Cooling fans help keep operating temperatures lower.

SPECIFICATIONS

• Description: 48" Hero Cutter Deck, 15 HP Kawasaki® FS600V - electric-start engine
• Total Fuel Capacity: 5.5 gallons
• Drive Tires: 18" x 6.5"-8" (36"); 18" x 8.5"-8" (48", 52" and 61")
• Caster Tires: 9" x 6.5"-4"
• Seat: n/a
• Drive System Type: Hydro-Gear ZT2800 Transaxle
• Pumps: Internal Pump: 10 cc
• Motors: Internal Motor: 16 cc
• Forward Ground Speed: Up to 7 mph
• Reverse Ground Speed: 3 mph
• Parking Brake: Hand lever
• Cutting Widths: 36", 48", 52" and 61"
• Type: Hero Cutter Deck
• Cutting Height: 1.5" to 4.5" in .25" increments
• Deck Lift: Hand lever
• Construction: Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
• Spindles: Aluminum housing with sealed ball bearings.
• Blade Engagement: Ogura GT1-BS03 (110 ft lb); Adjustable air-gap for extended life.

DIMENSIONS

• Length: 75.5"
• Height: 44"
• Tracking Width: 41.5"
• Width (chute down): 60.5"
• Width (chute in transport position): 49"
• Weight: 585 lb

ACCESSORIES

• Fabric Bag Grass Catcher
• Hurricane Mulch System
• Mulch Plate
• Chrome Wheel Covers
• Blade Buddy

Description:

Featuring a Blade Brake Clutch and a Mono-Comfort Handlebar that allows for convenient, unobstructed access to the polymer grass bag, the STIHL® RM 655 VS is a durable mower ideal for homeowners. The handlebar folds flat for convenient storage or maintenance, and the polymer grass bag directs air and dust away from the operator. The Blade Brake Clutch system allows you to stop the blade without needing to restart the engine to remove obstacles in the mowing path during intermittent stops. The Vario Drive self-propel system enables you to select your ground speed. The STIHL® RM 655 VS gives you powerful performance and convenience.

Features:

• Kohler HD Series™ HD 775 OHV Engine – Kohler technology maintains engine power for a cleaner cut, even in tall grass.
• Blade Brake Clutch (BBC) – The Blade Brake Clutch allows the user to leave the engine running and disengage the multiblade to remove objects in the mowing path without having to stop and restart the engine during brief stops.
• Vario Drive (V) – The simple Vario Drive enables the operator to select their ground speed.
• Aluminum Mowing Deck – The corrosion-resistant aluminum mowing deck is optimized for airflow without the added weight.
• Ball Bearing Wheels – The sealed ball bearing wheels are designed for long life.
• Spring-Assisted Single Point Height Adjustment – Each mower features seven cutting heights adjusted from a single location.
• Polymer Grass Bag – The polymer grass bag is designed to improve operator comfort and features a closed top and back along with downward angled side vents to reduce dust exposure. In addition, when the grass bag is empty, the indicator is flipped up to indicate the bag is not full. The indicator will flip down when the bag is full.
• Mono-Comfort Handlebar – The state-of-the-art Mono-Comfort Handlebar enables easy access to the grass bag, height adjustment, and convenient foldaway storage.
• Rubberized Soft-Touch Handle – Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods.
• Backed by STIHL® engineering, this mower delivers consistent, high-quality performance and ease of use for demanding homeowners.

Specification:

• Drive Type: Vario (variable speed drive)
• Deck Material: Aluminum
• Mulch Function: Plug (removable mulching plug)
• Cutting Height: 0.98 – 3.35 in.
• Cutting Height Options: Seven-level central cut-height adjustment
• Power Source: Gas
• Weight: 101.4 lbs.
• Deck Width: 21 in.
• Cutting Width: 20.87 in.
• Number of Blades: One Multiblade
• Mowing Blade Speed: 2,800 rpm
• Self-Propelled: Yes
• Engine Brand: Kohler HD Series™
• Engine: HD775 OHV
• Displacement: 173 cc
• Rated Power: 7.46 lbs. ft. torque
• Speeds: 0 – 2.85 mph
• Grass Catcher Capacity: 18.5 gal.
• Blade Brake Clutch: Yes (allows the blade to stop while the engine continues running)

Description:

The STIHL® RM 655 YS offers dependable performance with infinite speed adjustment. The hydrostatic gearbox provides a wider range of ground speeds to reduce operator fatigue and increase productivity. Featuring a polymer grass bag, mulching functionality, and easy height adjustment, this mower is ideal for the homeowner who wants to get the job done quickly.

Features:

• Kohler HD Series™ HD 775 OHV Engine – Kohler technology maintains engine power for a cleaner cut, even in tall grass.
• Blade Brake Clutch (BBC) – The BBC allows the user to leave the engine running and disengage the multiblade to remove objects in the mowing path without having to stop and restart the engine during brief stops.
• Hydrostatic Gearbox (Y) – The hydrostatic gearbox provides a wider range of ground speeds to reduce operator fatigue and increase productivity.
• Aluminum Mowing Deck – The corrosion-resistant aluminum mowing deck is optimized for airflow without the added weight.
• Ball Bearing Wheels – The sealed ball bearing wheels are designed for long life.
• Spring-Assisted Single Point Height Adjustment – Each mower features seven cutting heights adjusted from a single location.
• Polymer Grass Bag – The polymer grass bag is designed to improve operator comfort and features a closed top and back along with downward angled side vents to reduce dust exposure. In addition, when the grass bag is empty, the indicator is flipped up to indicate the bag is not full. The indicator will flip down when the bag is full.
• Mono-Comfort Handlebar – The state-of-the-art Mono-Comfort Handlebar enables easy access to the grass bag, height adjustment, and convenient foldaway storage.
• Rubberized Soft-Touch Handle – Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods.
• Backed by STIHL® engineering, this mower delivers reliable performance and thoughtful features for demanding lawn care tasks.

Specifications:

• Drive Type: Hydrostatic
• Deck Material: Aluminum
• Mulch Function: Plug
• Cutting Height: 0.98 – 3.35 in.
• Cutting Height Options: Seven-Level Central Cut-Height
• Power Source: Gas
• Weight: 123.5 lbs
• Deck Width: 21 in.
• Cutting Width: 20.87 in.
• Number of Blades: 1—Multiblade
• Mowing Blade Speed: 2,800 rpm
• Self-Propelled: Yes
• Engine Brand: Kohler HD Series™
• Engine Model: HD775 OHV
• Displacement: 173 cc
• Rated Power: 7.46 lbs. ft. torque
• Speeds: 0 – 3.91 mph
• Grass Catcher Capacity: 18.5 gal.
• Blade Brake Clutch: Yes

Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

The new V-Ride™ II stands as a testament to Scag's commitment to excellence. Easy to operate, ready to conquer any terrain, and built to last, this stand-on mower redefines performance and comfort.

Features:

1. Ultra Compact and Agile: Despite its compact size, the V-Ride™ II offers exceptional agility, comfort, and stability. It combines the speed and comfort of a rider with the space-saving convenience of a walk-behind mower.
2. Full-Sized Features: The V-Ride™ II is packed with full-sized features, including a dual hydraulic pump dual wheel motor drive system, coil-suspension platform, and a heavy-duty steel main frame, ensuring durability and performance.
3. Engine Options: Choose from powerful Kawasaki FX, Kawasaki FS, or Kohler EFI commercial-grade engines to suit your specific needs and preferences.
4. Deck Options: Available with a 36" Advantage™ or a 48", 52", or 61" Velocity Plus™ deck, delivering immaculate quality-of-cut and performance.
5. Productivity: With forward speeds of up to 10.5 MPH (on 48", 52", & 61" models) and up to 5 MPH reverse speeds, productivity is maximized. The 36" model offers speeds of up to 8.5 MPH forward.
6. Operator Comfort: The spacious operator platform with coil suspension provides a smooth ride, reducing operator fatigue. The wide platform, made from heavy-gauge steel with an extruded star pattern, ensures no-slip footing.
7. Engine Options: Kawasaki FX series engines feature commercial-grade canister air filters and twin barrel carburetors, while Kawasaki FS engines boast dual element air filters and single barrel carburetors. The Kohler EFI engine offers electronic fuel injection for easy starting and increased fuel efficiency.
8. Main Frame Construction: The Scag tough main frame construction delivers solid strength and ensures years of trouble-free service, designed for longevity and durability.

The V-Ride™ II is available in several model configurations to fit a wide range of professional lawn maintenance needs, making it the ultimate stand-on mower with unmatched handling, stability, and quality. Experience the Scag difference today by contacting your local dealer for a demonstration.

2025 TrimStar 36" w MFG warranty, 27 hours

model 939496

Call/text 253-435-9284 for more info. 

Description:

Enjoy a smooth ride and take on tough jobs with the STIHL® RZ 760i zero-turn mower featuring an innovative suspension system with mowing deck height compensation and a 60" mowing deck for wide cutting swaths. The Vanguard® Electronic Fuel Injection (EFI) engine with Oil Guard™ System provides reliable operation.

Features:

• Vanguard® Oil Guard™ System – The Vanguard® Oil Guard™ System features a separate oil tank, transferring cool oil to the engine—helping oil last longer, increasing working times, and allowing for less maintenance.
• Commercial-Grade Hydro-Gear® ZT-4400 Transaxles – Hydro-Gear® ZT-4400 transaxles enable 10 mph forward ground speed and 5 mph in reverse, helping allow for smooth and efficient cutting.
• Heavy-Duty 8” Cast Iron Greaseable Mower Deck Spindles – The STIHL® RZ 700 Series’ 8" cast iron greaseable mower deck spindles are easy to maintain.
• Deluxe Seat with Armrests – Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity – With a fuel gauge visible from the operator's seat, users can monitor fuel level and enjoy fuel coverage for large jobs; the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers – Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation – Front suspension features two control arms that connect to shock absorbers, helping wheels remain perpendicular to the ground throughout their range of travel.
• Swingarm Rear Suspension with Shock Absorbers – Adjustable rear suspension with shock absorbers provides comfort and performance on uneven terrain.
• Efficient Two-Belt Mower Drive System – Reduces strain and flex on the belts, allowing cooler operation, extended lifespan, and reduced maintenance.
• Two USB-A Ports – Provide 3.15 amps of power for charging devices.
• Roll Over Protection System (ROPS) – Advanced ROPS features polyurethane blocks to prevent rattling and folds for convenient storage and transport.
• Flip-Up Floor Pan – Allows easy access for servicing and cleaning the mowing deck.
• Foot-Operated Cutting Height – Users can adjust the cutting height while seated.
• Dual-Function Hour Meter – Tracks both total run time and mowing hours to help manage regular maintenance.
• Flexible Side Rubber Discharge Chute – Directs clippings away from the cutting path.
• Integrated Cup Holders – Keep beverages secure and accessible.
• Trailer Hitch – Rear hitch supports towing of optional accessories and attachments.
• *Accessories and attachments sold separately.
• Made in America – A majority of STIHL® products sold in America are made in America from U.S. and global materials.

Specification:

• Horsepower: 28 hp (20.9 kW)
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal (41.6 L)
• Displacement: 810 cc
• Transaxles: Hydro-Gear® ZT-4400
• Forward Ground Speed: 10 mph (16.1 km/h)
• Reverse Ground Speed: 5 mph (8 km/h)
• Deck Width: 60 in (152.4 cm)
• Mowing Height Range: 1.5 in – 5 in (38 mm – 127 mm)
• Deck Construction: Fabricated from 10-gauge steel with a 10-gauge doubler in the spindle area and 1/2" (12.7 mm) reinforcement plates on the leading edge
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Front Tires: 13 x 6.5-6
• Rear Tires: 24 x 12-12
• Weight: 1,406 lbs (637 kg)
• Power Source: Gas
• Engine Governor: Mechanical
• Lubrication System: Oil Guard™
• Spindle Shaft Diameter: 1 in (25.4 mm)
• Spindle Bearings: 2.5 in x 1 in (63.5 mm x 25.4 mm) Dual Ball Bearing
• Spindle Hubs: 7.9 in (20 cm) Cast Iron & Greaseable
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.68 in (6.8 cm)
• Rear Suspension Travel: 2.68 in (6.8 cm)

Description:

Enjoy a smooth ride and take on tough jobs with the STIHL RZ 752i K zero-turn mower featuring an innovative suspension system with mowing deck height compensation and a 52” mowing deck for wide cutting swaths. The Kawasaki Electronic Fuel Injection (EFI) engine provides reliable operation and consistent power output, and the commercial-grade materials and components make this mower tough and durable.

Features:

• Kawasaki 26 hp EFI Engine with Electronic Throttle Control - The STIHL RZ 752i K and STIHL RZ 760i K feature a Kawasaki Electronic Fuel Injection (EFI) engine with engine throttle control which provides fuel-efficient operation.
• Commercial-Grade Hydro-Gear® ZT-4400 Transaxles - Hydro-Gear® ZT-4400 transaxles enable ten mph forward ground speed and five mph in reverse, helping allow for smooth and efficient cutting.
• Heavy-Duty 8” Cast Iron Greaseable Mower Deck Spindles - The STIHL RZ 700 Series’ eight-inch cast iron greaseable mower deck spindles are easy to maintain.
• Deluxe Seat with Armrests - Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity - With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers - Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation - Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers - The adjustable rear suspension with shock absorbers are designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System - Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports - Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) - The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan - Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height - Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter - Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute - Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders - Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch - This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Horsepower: 26 hp
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal.
• Displacement: 726 cc
• Transaxles: Hydro-Gear® ZT-4400
• Forward Ground Speed: 10 mph
• Reverse Ground Speed: 5 mph
• Deck Width: 52 in.
• Mowing Height Range: 1.5" - 5"
• Deck Construction: Fabricated from 10-gauge steel with a 10-gauge doubler in the spindle area and 1/2" reinforcement plates on the leading edge
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Front Tires: 13 x 6.5-6
• Rear Tires: 24 x 9.5-12
• Weight: 1,298 lbs
• Power Source: Gas
• Engine Governor: Electronic Throttle Control
• Spindle Shaft Diameter: 1 in.
• Spindle Bearings: 2.5" x 1" Dual Ball Bearing
• Spindle Hubs: 7.9" Cast Iron & Greaseable
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.68 in.
• Rear Suspension Travel: 2.68 in.

Description:

The STIHL® RZ 752i is built for hard work and operator comfort featuring a 52” mowing deck and an innovative suspension system that create a smooth, stable ride. The Vanguard® Electronic Fuel Injection (EFI) engine with MotoMix® provides fuel efficiency and extends maintenance intervals. Built with heavy-duty, commercial-grade materials and components, this mower is made to take on tough jobs.

Features:

• Vanguard® MotoMix® System – Vanguard® MotoMix® System features a separate oil tank, transferring cool oil to the engine—helping oil last longer, increasing working times, and allowing for less maintenance.
• Commercial-Grade Hydro-Gear® ZT-4400 Transaxles – Hydro-Gear® ZT-4400 transaxles enable ten mph forward ground speed and five mph in reverse, helping allow for smooth and efficient cutting.
• Heavy-Duty 8” Cast Iron Greaseable Mower Deck Spindles – The STIHL® RZ 700 Series’ eight-inch cast iron greaseable mower deck spindles are easy to maintain.
• Deluxe Seat with Armrests – Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity – With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers – Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation – Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers – The adjustable rear suspension with shock absorbers is designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System – Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports – Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) – The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan – Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height – Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter – Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute – Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders – Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch – This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America – A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Horsepower: 28 hp
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal.
• Displacement: 810 cc
• Transaxles: Hydro-Gear® ZT-4400
• Forward Ground Speed: 10 mph
• Reverse Ground Speed: 5 mph
• Deck Width: 52 in.
• Mowing Height Range: 1.5" - 5"
• Deck Construction: Fabricated from 10-gauge steel with a 10-gauge doubler in the spindle area and 1/2" reinforcement plates on the leading edge
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Front Tires: 13 x 6.5-6
• Rear Tires: 24 x 9.5-12
• Weight: 1,319 lbs.
• Power Source: Gas
• Engine Governor: Mechanical
• Lubrication System: Oil Guard™ with 500-Hour Service Interval
• Spindle Shaft Diameter: 1 in.
• Spindle Bearings: 2.5" x 1" Dual Ball Bearing
• Spindle Hubs: 7.9" Cast Iron & Greaseable
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.68 in.
• Rear Suspension Travel: 2.68 in.

Description:

With an advanced suspension system and a commercial-grade 60” mowing deck, the STIHL® RZ 560 K zero-turn mower is built for durability, operator comfort, and a long life span. The two-belt deck pulley system reduces stress on each belt to keep the 24 hp Kawasaki® engine running cooler with less maintenance. The Hydro-Gear® ZT-3400 transaxles enable ten mph forward ground speed and five mph in reverse, allowing for smooth and efficient cutting.

Features:

• Kawasaki® 24 hp Carbureted Engine – The STIHL® RZ 552 K and STIHL® RZ 560 K zero-turn mowers feature a reliable 24 hp Kawasaki® carbureted engine.
• Commercial-Grade Hydro-Gear® ZT-3400 Transaxles – Hydro-Gear® ZT-3400 transaxles enable 10 mph forward ground speed and 5 mph in reverse, allowing for smooth and efficient cutting.
• Greaseable Mower Deck Spindles – Greaseable mower spindles allow for user maintenance and extend the life span of each spindle.
• Deluxe Seat with Armrests – Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity – With a fuel gauge visible from the operator's seat, users can monitor fuel levels and enjoy extended coverage for large jobs. The wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers – Adjustable to suit your terrain, the rear suspension uses shock absorbers to stabilize the machine for consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation – Features two control arms connected to shock absorbers, keeping wheels perpendicular to the ground throughout travel for consistent cutting.
• Swingarm Rear Suspension with Shock Absorbers – Adjustable rear suspension enhances performance and comfort on uneven surfaces.
• Efficient Two-Belt Mower Drive System – Reduces strain and flex on belts, allowing cooler operation, extended belt life, and lower maintenance.
• Two USB-A Ports – Provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) – Advanced ROPS features polyurethane blocks to prevent rattling in motion and folds for storage or transport.
• Flip-Up Floor Pan – Allows easy access for servicing and cleaning the mower deck.
• Foot-Operated Cutting Height – Enables cutting height adjustments while seated.
• Dual-Function Hour Meter – Tracks both run time and mowing hours to assist with maintenance schedules.
• Flexible Side Rubber Discharge Chute – Allows clippings to exit the side and stay clear of the cutting path.
• Integrated Cup Holders – Keep drinks secure and accessible.
• Trailer Hitch – Rear trailer hitch allows towing of optional accessories and attachments.*
• *Accessories and attachments sold separately.
• Made in America – A majority of STIHL® products sold in America are made in America using U.S. and global materials.

Specifications:

• Horsepower: 24 hp
• Fuel System: Carbureted
• Fuel Tank Capacity: 5.5 gal
• Displacement: 726 cc
• Transaxles: Hydro-Gear® ZT-3400
• Forward Ground Speed: 10 mph
• Reverse Ground Speed: 5 mph
• Deck Width: 60 in
• Mowing Height Range: 1.5" - 5"
• Deck Construction: Fabricated 10-gauge steel with 3/8" reinforcement plates
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Front Tires: 13 x 6.5-6
• Rear Tires: 23 x 10.5-12
• Weight: 1,291 lbs
• Power Source: Gas
• Engine Governor: Kawasaki FT730V
• Spindle Shaft Diameter: 1 in.
• Spindle Bearings: 2.5" x 1" Dual Ball Bearing
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.05 in.
• Rear Suspension Travel: 2.68 in.

Description:

When we developed the Stander® ZK, nothing was held back! The result is the most productive and versatile large frame mower ever built. Big-bore EFI engines provide power without compromising efficiency. High flow hydraulics propel high traction 23” or 24” tires for excellent hill holding, and dual-sided fuel tanks provide all-day run time. Take on your next season with a ZK. It’s the ultimate stand-on mower. Period.

Specifications:

• Stock Number: WSZK52S61G83B
• Make: Wright
• Model: Stander ZK
• Condition: New
• Color: Yellow
• CUTTING
• Deck Size: 52"
• ENGINE
• Engine: Vanguard™ BIG BLOCK™ EFI
• Horsepower: 40 HP
• Fuel Type: Gas
• CATEGORY
• Main Category: Stand On Mowers
• All Mowers: All Mowers
• Commercial or Residential: Commercial

Description:

The STIHL® RZ 960i K zero-turn mower features a Kawasaki Electronic Fuel Injection (EFI) engine and electronic throttle control for fuel efficiency and easy operation. The 60" mowing deck and top-of-the-line suspension system with mowing deck height compensation help operators get the job done well while also prioritizing comfort. Built with heavy-duty, commercial-grade materials and components, this mower is made for hard work.

Note: Not available for purchase or delivery in California

Features:

• Kawasaki 38.5 hp EFI Engine and Electronic Throttle Control - The 38.5 hp STIHL® RZ 960i K and STIHL® RZ 972i K feature a Kawasaki Electronic Fuel Injection (EFI) engine and electronic throttle control which provides fuel-efficient and easy operation.
• Commercial-Grade Hydro-Gear® ZT-5400 Transaxles Include 9" Cooling Fans - Hydro-Gear® ZT-5400 transaxles offer a top forward ground speed of twelve mph and a top reverse speed of five mph, as well as nine inch cooling fans to prevent overheating.
• Heavy-Duty 10" Cast Iron Greaseable Mower Deck Spindles with Taper Lock Pulleys - The STIHL® RZ 900 Series features taper lock spindle pulleys to ensure perfect belt alignment and the tightest fit between the pulley and spindle to ensure a long service life.
• Premium Suspension Seat - The STIHL® RZ 900 Series features a premium suspension seat with adjustable backrest, adjustable lumbar support, and adjustable armrests.
• Large Fuel Capacity - With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers - Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation - Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers - The adjustable rear suspension with shock absorbers are designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System - Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports - Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) - The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan - Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height - Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter - Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute - Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders - Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch - This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Engine & Power
• Horsepower: 38.5 hp
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal.
• Displacement: 999 cc
• Engine Governor: Electronic Throttle Control
• Transmission & Speed
• Transaxles: ZT-5400 Hydro-Gear® with 9" cooling fans
• Forward Ground Speed: 12 mph
• Reverse Ground Speed: 5 mph
• Cutting System
• Deck Width: 60 in.
• Mowing Height Range: 1.5" - 5"
• Deck Construction: 10-gauge steel with additional reinforcement
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Wheels & Suspension
• Front Tires: 13 x 6.5-6 – Flat Free
• Rear Tires: 26 x 12-12
• Front Suspension Travel: 2.68 in.
• Rear Suspension Travel: 2.68 in.
• Build & Additional Features
• Weight: 1,621 lbs.
• Power Source: Gas
• Spindle Bearings: 2.5" x 1.18" Double Row Angular Ball Bearings
• Spindle Hubs: 10" Cast Iron & Greaseable
• USB Amperage: 3.15 A

Description:

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

EASY HEIGHT-OF-CUT ADJUSTMENT

FINE-TUNED AND SIMPLE

Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.

Engines

Honda GXV160 Engine

Designed specifically to meet the demands of professionals working in commercial landscaping and other related industries, the Honda GXV160 delivers reliability and efficiency from dusk until dawn. Engineered with precision for smoother performance and quiet operation, this 4-stroke single cylinder engine features an OHV design for increased efficiency and optimal power transfer and is easy-to-start because of its automatic decompression system.

Features:

• Air-cooled, 4-stroke OHV 163 cc engine
• High power-to-displacement ratio
• High quality materials and purpose-built components ensure reliable long-term use
• Engineered for low vibration and quieter noise levels
• Easy starting with an automatic decompression system
• Large fuel tank and superior fuel efficiency for less downtime
• EPA certified

Specifications:

• Product Dimensions
• Length in Operating Position: 63.0 – 68.5 inches (both models)
• Length in Storage Position: 41 inches (both models)
• Tracking Width: 21.2 inches (both models)
• Width: 23.25 inches (both models)
• Height in Operating Position: 32.75 inches (low) / 43.5 inches (high)
• Height in Storage Position: 22 inches (both models)
• Weight (without bagger): 132 lb (SFC-21-5CV), 138 lb (SFC-21-7CV)
• Weight (with bagger): 137 lb (SFC-21-5CV), 143 lb (SFC-21-7CV)
• General Specifications
• General Type: Heavy-duty industrial/commercial (both models)
• Brand: Kohler® Command PRO® (both models)
• Model: CV173 (SFC-21-5CV), CV224 (SFC-21-7CV)
• Horsepower: 5HP @ 3300 RPM (SFC-21-5CV), 7HP @ 3300 RPM (SFC-21-7CV)
• Engine Type: 4-cycle gas, OHV, air-cooled, single-cylinder, vertical shaft (both models)
• Displacement: 173 cc (SFC-21-5CV), 224 cc (SFC-21-7CV)
• Cylinder: One with cast-iron cylinder bore (both models)
• Governor: Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm (both models)
• Air Cleaner: Quad-Clean™ four-stage, cyclonic air filter (both models)
• Exhaust: Side discharge muffler with guard (SFC-21-5CV), Front discharge muffler with guard (SFC-21-7CV)
• Oil Pump Group: Steel oil pump; Full pressure lubrication with spin-on oil filter (both models)
• Starter/Electrical: Easy-Pull™ recoil start (both models)
• 50-State Compliant: Yes (both models)
• Engine Deck & Fuel Tank
• Engine Deck Thickness: 14 gauge (both models)
• Fuel Tank Capacity: 0.37 gallon (1.4 liters) plastic tank (SFC-21-5CV), 1 gallon (3.785 liters) plastic tank (SFC-21-7CV)
• Wheels & Tires
• Drive Tires: 10.5 x 3 (both models)
• Front Tires: 9 x 2.25 (both models)
• Handlebars & Drive System
• Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable (both models)
• Transmission: GT MG 512 transmission, 3-speed (both models)
• Steering/Travel Control: Variable drive control bar and 3-speed selector lever on handlebar (both models)
• Transmission Output Shaft: 0.50" diameter (both models)
• Safety & Forward Speed
• Safety Group: Handle actuated operator presence system (both models)
• Forward Speed: Up to 4.25 mph (both models)
• Cutter Deck
• Cutter Deck Type: High-vacuum, high-capacity design (both models)
• Deck Construction: 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped (both models)
• True Cutting Width: 21 inches (53.34 cm) (both models)
• Cutting Height Adjustment: 1.5" to 4.5" in 0.5" increments (both models)
• Cutter Blade: 0.1345 in. thick, milled edge, wear-resistant (both models)
• Blade Engagement: Blade control bar controlled Blade Brake Clutch (BBC), connected to cutter blade (both models)
• Discharge Opening: Rear-discharge with extra wide discharge opening (both models)
• Clutch Type: Heavy-duty Blade Brake Clutch (BBC) (both models)
• Optional Items/Attachments
• Mulching Plug: Included (both models)
• Fabric Grass Catcher: Included; 2.2 bushels (2.74 cu. ft.) (both models)
• Side-Discharge Adapter: Available accessory (both models)

Description:

(SFC-21-7CV)

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

Specifications:

• Engine: 7HP @ 3300 RPM, 4 cycle gas, OHV, air-cooled, single-cylinder, vertical shaft
• Transmission: GT MG 512 transmission, 3-speed
• Wheels/Tires: Drive: 10.5 x 3 / Front: 9 x 2.25
• Handle Bars: 1″ diameter, thick wall tubing, 3-position adjustable
• Safety Group: Handle actuated operator presence system
• Forward Speed: Up to 4.25 mph
• Cutting Width: 21 inches (53.34 cm)
• Cutting Height Adjustment: 1.5″ to 4.5″ in 0.5″ increments
• Cutter Blade: 0.1345 in. thick, milled edge, wear resistant

Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Engines

Kohler Command PRO CV224 Engines

With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.

Features include:

• Torque output: 11.0 ft-lbs
• 3-year limited commercial warranty
• Enjoy effortless starts thanks to our Easy-Pull™ technology
• Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
• Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
• Cast-iron cylinder liners add durability and engine protection

Specifications:

Dimensions & Weight

• Length – Transport (handles in upright transport position): 41″ / 44″
• Length – Minimum (handles in highest operating position): 66″ / 69″
• Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
• Tracking Width: 28.75″
• Width (with discharge chute): 36.75″
• Width (with discharge block-off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Maximum Operating: 45.25″
• Height – Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs. / 233 lbs.
• Operating Weight – Mulching: 214 lbs. / 227 lbs.
• Operating Weight – Discharging: 213 lbs. / 226 lbs.

General Specifications

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
• Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel

Drive System

• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 30″
• Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
• Cutting Height: 1.5″ to 5″ in 0.25″ increments
• Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
• Deck Lift: Hand lever, single-point adjustment
• Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)

Discharge, Mulch, & Bagging

• Standard Discharge, Mulch, & Bagging: Yes
• Bag Capacity: 2.5 Bushels

Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Features:

Mow with Ease

• Front Swivel Caster Wheels: Enhance maneuverability in landscaped areas with front swivel caster wheels. Convert fixed wheel models to swivel with an available accessory.

Fully Fabricated and Welded Steel Cutter Deck

• Military-Grade Steel Deck: Constructed with a 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate, and ¼” side reinforcement bar for unmatched durability and a quality cut.

Fully Fabricated and Welded Steel Frame

• Military-Grade Steel Frame: The steel frame is over 200% stronger than standard drawing steel used in common stamped frames and decks, providing superior strength and longevity.

Single Point Height-of-Cut Adjustment

• Fine-Tuned and Simple: Easily adjust the cutting height from a single location, with settings from 1.5” to 5” in .25” increments, eliminating the need for multiple adjustments.

Offset Blade Setup

• Simplified Deck Drive System: Features a less complex, easier-to-maintain offset blade design compared to traditional timed deck setups. Reduces repair/replace time for belts.

Scag Level Quality-of-Cut

• Unmatched Performance: Large cutting chamber processes more grass and efficiently handles wet and lush springtime grasses. Oversized discharge opening for superior performance.

Operator Control Panel

• Ergonomic Controls: Controls are designed to match the natural angles of your hands, making them easily accessible. Includes blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter, and park brake.

Oversized Adjustable Controls

• Achieve Maximum Comfort: Oversized handles with internally routed cables for protection and tool-free height adjustment for operator comfort. Includes vertical adjustment for transportation or storage.

Discharge – Mulch – Bag

• 3-in-1 Versatility: Offers discharge, mulch, or bag options. Standard equipment includes discharge chute, deck plug and mulch plate, bagging baffle, and fabric bag for flexible operation.

Powerful Transmission & Engine Combo

• Maximum Power for Tough Cuts: Combines the GT MV702 transmission with the Kohler CV224 engine for optimal performance in demanding cutting conditions.

Specification:

• Description: 30″ fully fabricated steel cutter deck, Kohler 224CV engine – recoil-start engine
• Horsepower: 7

Product Dimensions

• Length – Transport (handles in upright transport position): 41″
• Length – Minimum (handles in highest operating position): 66″
• Length – Max (handles in lowest operating position): 73.5″
• Tracking Width: 28.75″
• Width (w/ discharge chute): 36.75″
• Width (w/ discharge block off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Max Operating: 45.25″
• Height – w/ Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs.
• Operating Weight – Mulching: 214 lbs.
• Operating Weight – Discharging: 213 lbs.

General Specifications

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
• Front Tires: 9” x 2.25” rubber tire with glass-filled polypropylene wheel
• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 30″
• Type: Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup.
• Cutting Height: 1.5″ to 5″ in .25″ increments
• Blade Type: Optimized for maximum performance whether discharging, mulching, or bagging
• Deck Lift: Hand lever, single-point adjustment
• Construction: 14-gauge, grade 100 Military-Grade steel deck shell with 12-gauge spindle reinforcement plate, ¼” trim side reinforcement bar for extra protection against impacts
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement: Blade brake clutch allows operator to disengage cutter blades without shutting off the machine
• Discharge, Mulch, Bag: Standard
• Bag Capacity: 2.5 Bushels

Description:

Because every home deserves stripes, the Liberty® Z is designed and manufactured to deliver a top-of-the-line experience at a homeowner price point. A professionally-constructed mower, fit for your own lawn. The Liberty Z gives more people the chance to see why Scag® machines are Simply the Best.

Other manufacturers opt for less expensive, smaller-capacity, nonadjustable, “disposable” clutches. Not Scag®. Scag PTO clutch brakes are manufactured by Ogura, the world’s best manufacturer of electromagnetic clutches, providing smooth blade engagements and fast blade stops.

All Ogura clutches feature an adjustable air gap. What does that mean to you? It means that when most clutches are worn out and must be replaced at a significant cost to YOU, the Ogura clutch can be easily adjusted to bring it back into specification (your Scag dealer can perform this adjustment).

These clutches also feature industry-leading torque values (the holding power that links the engine to the cutter-deck drive system) to ensure solid drive to the cutter deck and no slipping in heavy conditions.

Features:

Ogura PTO Clutch Brake

• Strong, Adjustable Clutch for Long Life: The Ogura GT1 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck with 74 ft. lb. of holding strength. It features an adjustable air gap for increased durability and longevity.

Deep, Fabricated, and Welded Cutter Decks

• Heavy-Duty Hero Cutter Deck: Designed for superior quality-of-cut, the deep, fabricated deck handles large volumes of grass at high speeds. Heavy-duty aluminum, sealed ball bearing blade-drive spindles ensure reliable performance season after season.

High-Strength Steel Frame

• Solid Design for Years of Dependable Service: The tubular-steel main frame offers unmatched strength and durability for long-term use.

Low-Maintenance Mower Design

• More Uptime: Reduced grease points for increased operator convenience and ease of ownership, minimizing maintenance needs.

Proven Transaxles

• Speeds Up To 7 MPH: The Liberty Z features proven dual hydro transaxles (Tuff Torq TZ450, Hydro-Gear ZT-2800, or ZT-3100, depending on the model) for smooth and solid power delivery to the drive wheels.

Contoured, Bolstered, High-Back Seat

• Ride in Comfort: Ultra-comfortable, adjustable seat (with tools) featuring armrests* for improved comfort. *Armrests are standard on 48″, 52″, and 61″ models; optional for 36″ and 42″ models.

Easy Foot-Pedal Deck Lift

• Easy Up, Easy Down: Spring-assisted foot-pedal cutter-deck lift makes raising and lowering the cutter deck smooth and effortless.

Powerful and Efficient Engine Options

• Reliable Power, Up To 27 HP: A range of proven air-cooled, V-twin engine options available to meet various performance needs.

Specification:

• Description: 42″ Hero Cutter Deck, 22 HP Kohler® 7000 Series™ PRO – 725 cc displacement

Product Dimensions

• Length: 68.5″
• Width (chute down): 54.5″
• Width (chute in transport position): 43″
• Height: 41″
• Weight: 595 lb

General Specifications

• Total Fuel Capacity: 5.5 gallons
• Drive Tires: 20″ x 10″-8″
• Caster Tires: 11″ x 6″-5″
• Seat: Padded with armrests, forward and back adjustment (tools required)
• Drive System Type: Tuff Torq TZ450 Transaxle
• Pumps: Internal Pump: 10 cc
• Motors: Internal Motor: 10cc (Tuff Torq), 16 cc (Hydro-Gear)
• Forward Ground Speed: 7 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 42″
• Type: Heavy-Duty Hero Cutter Deck
• Cutting Height: 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Foot-operated pedal
• Construction: Dual-plate cutter deck constructed of 2 steel plates with a reinforcement plate at cutter deck spindles
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement:
• Ogura GT1 (74 ft-lb) for 36″, 42″, 48″, and 52″ models
• Ogura GT2 (108 ft-lb) for 61″ models
• Adjustable air-gap for extended life

Description:

48" Velocity Plus™ Cutter Deck, 23 HP Kohler® Command PRO®

Features:

• The envy of the neighborhood - 48", 52" or 61" Cutting Width: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48", 52" and 61" widths. An Advantage Cutter Deck is featured on 32" and 36" widths.
• Adjustable Operator Platform - Experience an Unmatched, Ultra-Comfortable Ride: The spacious operator platform delivers a smooth ride and reduces operator fatigue. Adjustable suspension spring can be moved forward or backward, with, or without, the spacer plate installed to meet the operator's comfort preference. Extra-large, extra-thick operator comfort cushion ensures comfortable operation, hour after hour.
• Cutter-Deck Lift System - Convenient, Spring-Assisted Lever: Cutter deck can be lifted and locked into transport position from the operator's station. Cutting heights are easily set by placing the tethered pin at the desired height.
• Ogura PTO Clutch Brake - Strong, Adjustable Clutch for Long Life: Provides excellent starting and stopping power for the cutter deck and an adjustable air gap for long life.
• Ease of Maintenance - More Uptime: Easy-to-remove covers, an unrestricted engine compartment, easy-to-reach grease Zerks and many more features make servicing the V-Ride™ II simple, so you can be in the shop less and on the job more.
• High-Strength Steel Frame - Solid Design for Years of Dependable Service: Heavy-duty, single-tube, steel main-frame construction delivers superior strength and ensures years of trouble-free service. The front caster-wheel weldments are replaceable.
• Powerful and Efficient Engine Options - Huge Power, Up To 40 HP: Choose from Briggs Vanguard and Kawasaki® powerplants; electronic fuel injection (EFI) options are available.
• Tiger Eye Advanced Monitoring System - Keep a Real-Time "Eye" on Important System Functions: Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator's seat. (Tiger Eye not available on 32" and 36" V-Ride II models.)
• Industrial-Grade Hydraulic System - Speeds Up To 10.5 MPH: 48", 52" and 61" models: Dual Hydro-Gear pumps (12 cc) and Parker wheel motors (14 ci) deliver dependable power, with speeds up to 10.5 mph. Pump shock valves ensure reliability and long life. Cooling fans help maintain safe operating temperatures. 32" and 36" models: Dual Hydro-Gear pumps (10 cc) and Parker wheel motors (12 ci) deliver dependable power, with speeds up to 8.5 mph.

Specifications:

• Description: 48" Velocity Plus™ Cutter Deck, 23 HP Kohler® Command PRO®
• Total Fuel Capacity: 5 gallons (32"); 6.75 gallons (36"); 8 gallons (48", 52", and 61")
• Drive Tires: 20" x 6.5"-10" (32"); 20" x 8"-10" (36"); 24" x 9.5"-12" (48" and 52"); 24" x 12"-12" (61")
• Caster Tires: 11" x 4"-5" (32" and 36"); 13" x 5"-6" (48" and 52"); 13" x 6.5"-6" (61")
• Seat: Extra-large comfort cushion
• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear 10 cc (32" and 36"); Hydro-Gear 12 cc (48", 52", and 61")
• Motors: Parker 12 ci (32" and 36"); Parker 14 ci (48", 52" and 61")
• Forward Ground Speed: 8.5 mph (32" and 36"); 10.5 mph (48", 52" and 61")
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever
• Cutting Widths: 32", 36", 48", 52" and 61"
• Type: Advantage (32" and 36"); Velocity Plus™ (48", 52", and 61")
• Cutting Height: 1.5" to 4.5" in .25" increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.; 32" model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement: Ogura GT2.5 (150 ft lb) - (32", 36", 48" and 52"); Ogura GT3.5 (250 ft lb) - (61"); Adjustable air-gap for extended life.

Dimensions

• Length: 67.5"
• Tracking Width: 48"
• Width (chute down): 61.25"
• Width (chute in transport position): 49.75"
• Height: 47.25"
• Weight: 1,015 lb

Accessories

• 2-Bag V-Ride II Spindle Driven Grass Catcher
• Fabric Bag Grass Catcher
• Hurricane Plus™ Mulch System
• Hurricane Mulch System
• Mulch Plate
• OCDC - Operator-Controlled Discharge Chute
• Light Kit
• Chrome Wheel Covers
• Air Filter Monitor
• Blade Buddy
• 12-Volt Accessory Outlet

Description:

Because every home deserves stripes, the Liberty® Z is designed and manufactured to deliver a top-of-the-line experience at a homeowner price point. A professionally-constructed mower, fit for your own lawn. The Liberty Z gives more people the chance to see why Scag® machines are Simply the Best.

Specifications:

• Deck Size: 52 inches
• Engine Power: 24 HP
• Engine Model: Kohler® 7000 Series™ PRO
• Displacement: 725 cc

Description:

All business—even at home—the Freedom Z® is perfect for landscapers needing a machine that can go the distance or for the pro-at-home who owns a large-acreage lot. Commercial-quality through and through, this machine is comfortable anywhere the job needs to be done.

Features:

• PTO Clutch Brake:
• Provides excellent starting and stopping power for the cutter deck.
• Offers 74 ft. lb. of holding strength.
• Adjustable air gap for enhanced durability.
• Cutter Deck:
• Deep, fabricated, and welded design for handling large amounts of grass at higher speeds.
• Heavy-duty Hero Cutter Deck construction for quality-of-cut.
• Aluminum, sealed ball bearing, blade-drive spindles for reliable performance.
• Frame:
• Tubular-steel main frame for unmatched strength and longevity.
• Transaxles:
• Hydro-Gear ZT-2800 Transaxles for speeds up to 8 MPH.
• Dual hydro transaxles with all-metal gears and spin-on oil filters.
• Large cooling fans to keep temperatures low and extend component life.
• Maintenance:
• Low-maintenance design with fewer grease points for increased operator convenience and uptime.
• Seat:
• Contoured, bolstered, high-back seat for improved comfort.
• Adjustable with tools and features armrests for added comfort during operation.
• Deck Lift:
• Easy foot-pedal deck lift with spring assistance for smooth raising and lowering of the cutter deck.
• Engine Options:
• Reliable power options up to 24 HP.
• Available with 22 hp and 24 hp Kohler® 7000 Series engines.
• PRO Performance filtration for smooth and consistent power delivery.

Specification:

• Engine: 26 HP Kohler® 7000 Series™ PRO – V-Twin, air-cooled engine.
• Cutter Deck: 52″ Hero Cutter Deck with dual-plate construction using 2 steel plates and a reinforcement plate at cutter deck spindles.
• Blade Engagement: Ogura GT1 PTO Clutch Brake with 74 ft lb holding strength and adjustable air-gap for extended life.
• Cutting Width: 52″
• Cutting Heights: Adjustable from 1.5″ to 4.5″ in 0.25″ increments.
• Deck Lift: Foot-operated pedal for easy adjustment.
• Drive System: Hydro-Gear ZT2800 Transaxle with internal pump (10 cc) and motor (16 cc).
• Speeds: Forward ground speed up to 8 mph, reverse ground speed up to 5 mph.
• Fuel Capacity: 6.5 gallons.
• Tires: Drive tires 20″ x 10″-10″, caster tires 11″ x 6″-5″.
• Seat: Padded with armrests, adjustable forward and back (tools required).
• Dimensions:
• Length: 73″
• Width (chute down): 64.5″
• Width (chute in transport position): 53″
• Height: 60″
• Weight: 765 lb

Description:

Featuring a comfortable operator platform with first-class suspension that minimizes fatigue, the V-Ride II™ delivers a natural, intuitive and smooth riding position the entire day. With unrivaled performance, stability and durability, this machine helps keep you in tip-top condition to get the job done day after day, year after year.

48", 52" or 61" Cutting Width

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48″, 52″ and 61″ widths. An Advantage Cutter Deck is featured on 32″ and 36″ widths

Scag® cutter decks have always given our competition a serious case of deck envy. Many try to duplicate the performance, but none can match it. The Velocity Plus™ cutter deck is an outstanding performer and delivers beautiful results.

The Velocity Plus™ Cutter Deck provides the unmatched power, precision and performance professionals demand. This revolutionary deck design delivers high-velocity discharge plus a beautiful manicured cut, even at faster ground speeds. A redesigned cutting chamber and massive discharge opening provide even greater cutting performance with maximum clipping dispersal in any conditions.

Strength — Scag’s tough cutter-blade spindles and Tri-Plate construction ensure solid performance and long life. A replaceable trim-side wear pad protects deck from damage.

Productivity — An extra-large discharge opening, paired with the Turbo Baffle, enhances discharge for even clipping dispersal.

Flexibility — The Velocity Plus cuts everything from fine grasses to tough weeds. The Custom-Cut™ Front Baffle System allows you to customize the deck to your individual conditions for even more productivity and higher performance.

Engines:

Kawasaki FT Series Engines

Commercial-Grade Power

The new Kawasaki® FT Series engines with patented Vortical air filtration blaze new trails.

Kawasaki® FT Series engines are designed and built to handle heavy loads. The Vortical air filtration system muscles out grass and debris while large, easy-to-access integrated clean-out ports amp up your efficiency and keep you cutting.

Other features include:

• 90° V-twin
• High-efficiency, centrifugal air intake system
• Dual-element air filtration with reinforced filter
• Large, easy-to-access integrated clean-out ports
• Pressurized lubrication system
• Electronic spark ignition
• Automatic compression release
• Internally vented carburetor with fuel shut-off solenoid
• Cast-iron cylinder liners

Specification:

• Specification - V-Ride II
• General:
• Total Fuel Capacity:
• 5 gallons (32″)
• 6.75 gallons (36″)
• 8 gallons (48″, 52″, and 61″)
• Drive Tires:
• 20″ x 6.5″-10″ (32″)
• 20″ x 8″-10″ (36″)
• 24″ x 9.5″-12″ (48″ and 52″)
• 24″ x 12″-12″ (61″)
• Caster Tires:
• 11″ x 4″-5″ (32″ and 36″)
• 13″ x 5″-6″ (48″ and 52″)
• 13″ x 6.5″-6″ (61″)
• Seat: Extra-large comfort cushion
• Drive System:
• Drive System Type: Dual Pump and Motor
• Pumps:
• Hydro-Gear 10 cc (32″ and 36″)
• Hydro-Gear 12 cc (48″, 52″, and 61″)
• Motors:
• Parker 12 ci (32″ and 36″)
• Parker 14 ci (48″, 52″ and 61″)
• Forward Ground Speed:
• 8.5 mph (32″ and 36″)
• 10.5 mph (48″, 52″ and 61″)
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever
• Deck:
• Cutting Widths: 32″, 36″, 48″, 52″, and 61″
• Type:
• Advantage (32″ and 36″)
• Velocity Plus™ (48″, 52″, and 61″)
• Cutting Height: 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles. 32″ model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement:
• Ogura GT2.5 (150 ft lb) – (32″, 36″, 48″, and 52″)
• Ogura GT3.5 (250 ft lb) – (61″)
• Adjustable air-gap for extended life.
• Length: 69.5″
• Tracking Width: 48″
• Width (Chute Down): 65.25″
• Width (Chute in Transport Position): 53.75″
• Height: 47.25″
• Weight: 1,000-1,022 lb

Description:

Built to deliver low-maintenance and high-performance operation, the Patriot™ makes a statement; it says you’re a hardworking lawn care professional that believes in getting a job done right. In other words, this machine is built to make money and leave your customers—and their neighbors—saluting your handiwork.

Specifications:

• Deck Size: 61 inches
• Engine Power: 27 HP
• Engine Model: Briggs CXi Series™

Description:

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

EASY HEIGHT-OF-CUT ADJUSTMENT

FINE-TUNED AND SIMPLE

Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.

Engines

Honda GXV160 Engine

Designed specifically to meet the demands of professionals working in commercial landscaping and other related industries, the Honda GXV160 delivers reliability and efficiency from dusk until dawn. Engineered with precision for smoother performance and quiet operation, this 4-stroke single cylinder engine features an OHV design for increased efficiency and optimal power transfer and is easy-to-start because of its automatic decompression system.

Features:

• Air-cooled, 4-stroke OHV 163 cc engine
• High power-to-displacement ratio
• High quality materials and purpose-built components ensure reliable long-term use
• Engineered for low vibration and quieter noise levels
• Easy starting with an automatic decompression system
• Large fuel tank and superior fuel efficiency for less downtime
• EPA certified

Specifications:

• Product Dimensions
• Length in Operating Position: 63.0 – 68.5 inches (both models)
• Length in Storage Position: 41 inches (both models)
• Tracking Width: 21.2 inches (both models)
• Width: 23.25 inches (both models)
• Height in Operating Position: 32.75 inches (low) / 43.5 inches (high)
• Height in Storage Position: 22 inches (both models)
• Weight (without bagger): 132 lb (SFC-21-5CV), 138 lb (SFC-21-7CV)
• Weight (with bagger): 137 lb (SFC-21-5CV), 143 lb (SFC-21-7CV)
• General Specifications
• General Type: Heavy-duty industrial/commercial (both models)
• Brand: Kohler® Command PRO® (both models)
• Model: CV173 (SFC-21-5CV), CV224 (SFC-21-7CV)
• Horsepower: 5HP @ 3300 RPM (SFC-21-5CV), 7HP @ 3300 RPM (SFC-21-7CV)
• Engine Type: 4-cycle gas, OHV, air-cooled, single-cylinder, vertical shaft (both models)
• Displacement: 173 cc (SFC-21-5CV), 224 cc (SFC-21-7CV)
• Cylinder: One with cast-iron cylinder bore (both models)
• Governor: Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm (both models)
• Air Cleaner: Quad-Clean™ four-stage, cyclonic air filter (both models)
• Exhaust: Side discharge muffler with guard (SFC-21-5CV), Front discharge muffler with guard (SFC-21-7CV)
• Oil Pump Group: Steel oil pump; Full pressure lubrication with spin-on oil filter (both models)
• Starter/Electrical: Easy-Pull™ recoil start (both models)
• 50-State Compliant: Yes (both models)
• Engine Deck & Fuel Tank
• Engine Deck Thickness: 14 gauge (both models)
• Fuel Tank Capacity: 0.37 gallon (1.4 liters) plastic tank (SFC-21-5CV), 1 gallon (3.785 liters) plastic tank (SFC-21-7CV)
• Wheels & Tires
• Drive Tires: 10.5 x 3 (both models)
• Front Tires: 9 x 2.25 (both models)
• Handlebars & Drive System
• Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable (both models)
• Transmission: GT MG 512 transmission, 3-speed (both models)
• Steering/Travel Control: Variable drive control bar and 3-speed selector lever on handlebar (both models)
• Transmission Output Shaft: 0.50" diameter (both models)
• Safety & Forward Speed
• Safety Group: Handle actuated operator presence system (both models)
• Forward Speed: Up to 4.25 mph (both models)
• Cutter Deck
• Cutter Deck Type: High-vacuum, high-capacity design (both models)
• Deck Construction: 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped (both models)
• True Cutting Width: 21 inches (53.34 cm) (both models)
• Cutting Height Adjustment: 1.5" to 4.5" in 0.5" increments (both models)
• Cutter Blade: 0.1345 in. thick, milled edge, wear-resistant (both models)
• Blade Engagement: Blade control bar controlled Blade Brake Clutch (BBC), connected to cutter blade (both models)
• Discharge Opening: Rear-discharge with extra wide discharge opening (both models)
• Clutch Type: Heavy-duty Blade Brake Clutch (BBC) (both models)
• Optional Items/Attachments
• Mulching Plug: Included (both models)
• Fabric Grass Catcher: Included; 2.2 bushels (2.74 cu. ft.) (both models)
• Side-Discharge Adapter: Available accessory (both models)

Description:

THE APEX PREDATOR:

It’s time for you to rise to the top of the food chain and tame turf with the Turf Tiger II™, a machine that’s tougher than any job you can throw at it. Engineered for superior durability, productivity and comfort, the Turf Tiger II gives you the edge over whatever nature throws at you while leaving you ready to take on the next challenge.

52", 61" or 72" Cutting Width:

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Features:

Scag® cutter decks have always given our competition a serious case of deck envy. Many try to duplicate the performance, but none can match it. The Velocity Plus™ cutter deck is an outstanding performer and delivers beautiful results.

The Velocity Plus™ Cutter Deck provides the unmatched power, precision and performance professionals demand. This revolutionary deck design delivers high-velocity discharge plus a beautiful manicured cut, even at faster ground speeds. A redesigned cutting chamber and massive discharge opening provide even greater cutting performance with maximum clipping dispersal in any conditions.

• Strength — Scag’s tough cutter-blade spindles and Tri-Plate construction ensure solid performance and long life. A replaceable trim-side wear pad protects deck from damage.
• Productivity — An extra-large discharge opening, paired with the Turbo Baffle, enhances discharge for even clipping dispersal.
• Flexibility — The Velocity Plus cuts everything from fine grasses to tough weeds. The Custom-Cut™ Front Baffle System allows you to customize the deck to your individual conditions for even more productivity and higher performance.

Engines:

Kohler Command PRO EFI Engines

Experience tremendous power, productivity and fuel savings with this winning combination of engine and machine. With its closed-loop injection system and heavy-duty air-filtration system, the EFI engine delivers superior performance, custom-made for the most demanding conditions.

This engine offers optimal fuel efficiency, consistent running temperatures and quiet operation. Easy-to-access service points, a solenoid shift starter and a 3-year limited warranty* put the finishing touches on this impressive package.

Other features include:

• Closed-loop electronic fuel injection for maximum fuel efficiency.
• Aluminum block with cast-iron cylinder liners.
• Industrial-grade air-filtration system ensures maximum protection of interior engine components.
• Dual air filters deliver maximum performance. The main filter traps dirt and debris while the inner filter prevents carburetor contamination during main filter servicing.
• Overhead valve design produces more power, improves fuel economy and cooling, and reduces oil consumption.
• Full-pressure oil-lubrication system with spin-on oil filter.
• Various user-friendly features: dual oil drains, easy-access oil fill, in-line fuel filter.
• Commercial-grade solenoid shift starter means quick, reliable starts.

Specifications:

Product Dimensions

• Length: 80.5"
• Width (Chute Down): 64.5"
• Width (Chute in Transport Position): 53.75"
• Height (ROPS Down): 46.5"
• Height (ROPS Up): 68"
• Weight: 1,418 lbs

General Specifications

• Total Fuel Capacity:
• Gas/Diesel: 12 gallons
• LP: 33.5 lbs
• Drive Tires: 26" x 9.5"-12"
• Caster Tires: 13" x 6.5"-6"
• Seat: 4-point iso-mounted torsion-spring suspension seat

Drive System

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear: 16 cc
• Motors: Parker: 18 ci
• Forward Ground Speed: 12 mph (Gas/LP), 10 mph (Diesel)
• Reverse Ground Speed: 6 mph
• Parking Brake: Adjustable foot-operated pedal, AUSCO disc brakes

Deck Specifications

• Cutting Width: 52"
• Cutting Type: Velocity Plus™
• Cutting Height: 1.5" to 6" in 0.25" increments
• Deck Lift: Adjustable foot-operated pedal
• Deck Construction: Tri-plate cutter deck with 3 steel plates totaling nearly 1/2" thickness, reinforcement plates at cutter deck spindles
• Spindles: Cast-iron housing with tapered roller bearings
• Blade Engagement: Ogura GT3.5 (300 ft-lb)
• Ogura GT5 (350 ft-lb) for Briggs Models
• Adjustable air-gap for extended life

Description:

In your world, it pays to become more swift, agile and powerful. Make it a reality with the quick and precise Cheetah II™, a machine that devours jobs at a pace you’ve only dreamed of while delivering an unmatched quality-of-cut and incredibly smooth ride. With the Cheetah II, you’ll never be caught from behind.

61" OR 72" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Specification:

pecifications for Scag Cheetah II Models:

- Model: 61″ Cheetah

 - Length: 87″-91.25″

 - Width (chute down): 73.5″

 - Width (chute in transport position): 62.75″

 - Height (ROPS folded): 49.5″

 - Height (ROPS up): 67″

 - Weight: 1,364-1,392 lb

- Model: 72″ Cheetah

 - Length: 91″-97.5″

 - Width (chute down): 83″

 - Width (chute in transport position): 73″

 - Height (ROPS folded): 49.5″

 - Height (ROPS up): 67″

 - Weight: 1,399-1,427 lb

Blackout Edition:

- Available Models: SCZII-61V-38CV-EFI, SCZII-72V-38CV-EFI

- Exclusivity: Currently exclusive to these models, subject to store availability.

- Special Features: Unique design and specifications.

- Note: Seat style and design may vary.

Description:

In your world, it pays to become more swift, agile and powerful. Make it a reality with the quick and precise Cheetah II™, a machine that devours jobs at a pace you’ve only dreamed of while delivering an unmatched quality-of-cut and incredibly smooth ride. With the Cheetah II, you’ll never be caught from behind.

Specifications:

Cutting Deck

• Type: Velocity Plus™
• Cutting Width: 61 inches

Engine

• Brand: Kohler
• Model: Command PRO® EFI
• Horsepower: 38 HP
• Fuel System: Electronic Fuel Injection (EFI)

Description:

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

EASY HEIGHT-OF-CUT ADJUSTMENT

FINE-TUNED AND SIMPLE

Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.

Engines

Honda GXV160 Engine

Designed specifically to meet the demands of professionals working in commercial landscaping and other related industries, the Honda GXV160 delivers reliability and efficiency from dusk until dawn. Engineered with precision for smoother performance and quiet operation, this 4-stroke single cylinder engine features an OHV design for increased efficiency and optimal power transfer and is easy-to-start because of its automatic decompression system.

Features:

• Air-cooled, 4-stroke OHV 163 cc engine
• High power-to-displacement ratio
• High quality materials and purpose-built components ensure reliable long-term use
• Engineered for low vibration and quieter noise levels
• Easy starting with an automatic decompression system
• Large fuel tank and superior fuel efficiency for less downtime
• EPA certified

Specifications:

• Product Dimensions
• Length in Operating Position: 63.0 – 68.5 inches (both models)
• Length in Storage Position: 41 inches (both models)
• Tracking Width: 21.2 inches (both models)
• Width: 23.25 inches (both models)
• Height in Operating Position: 32.75 inches (low) / 43.5 inches (high)
• Height in Storage Position: 22 inches (both models)
• Weight (without bagger): 132 lb (SFC-21-5CV), 138 lb (SFC-21-7CV)
• Weight (with bagger): 137 lb (SFC-21-5CV), 143 lb (SFC-21-7CV)
• General Specifications
• General Type: Heavy-duty industrial/commercial (both models)
• Brand: Kohler® Command PRO® (both models)
• Model: CV173 (SFC-21-5CV), CV224 (SFC-21-7CV)
• Horsepower: 5HP @ 3300 RPM (SFC-21-5CV), 7HP @ 3300 RPM (SFC-21-7CV)
• Engine Type: 4-cycle gas, OHV, air-cooled, single-cylinder, vertical shaft (both models)
• Displacement: 173 cc (SFC-21-5CV), 224 cc (SFC-21-7CV)
• Cylinder: One with cast-iron cylinder bore (both models)
• Governor: Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm (both models)
• Air Cleaner: Quad-Clean™ four-stage, cyclonic air filter (both models)
• Exhaust: Side discharge muffler with guard (SFC-21-5CV), Front discharge muffler with guard (SFC-21-7CV)
• Oil Pump Group: Steel oil pump; Full pressure lubrication with spin-on oil filter (both models)
• Starter/Electrical: Easy-Pull™ recoil start (both models)
• 50-State Compliant: Yes (both models)
• Engine Deck & Fuel Tank
• Engine Deck Thickness: 14 gauge (both models)
• Fuel Tank Capacity: 0.37 gallon (1.4 liters) plastic tank (SFC-21-5CV), 1 gallon (3.785 liters) plastic tank (SFC-21-7CV)
• Wheels & Tires
• Drive Tires: 10.5 x 3 (both models)
• Front Tires: 9 x 2.25 (both models)
• Handlebars & Drive System
• Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable (both models)
• Transmission: GT MG 512 transmission, 3-speed (both models)
• Steering/Travel Control: Variable drive control bar and 3-speed selector lever on handlebar (both models)
• Transmission Output Shaft: 0.50" diameter (both models)
• Safety & Forward Speed
• Safety Group: Handle actuated operator presence system (both models)
• Forward Speed: Up to 4.25 mph (both models)
• Cutter Deck
• Cutter Deck Type: High-vacuum, high-capacity design (both models)
• Deck Construction: 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped (both models)
• True Cutting Width: 21 inches (53.34 cm) (both models)
• Cutting Height Adjustment: 1.5" to 4.5" in 0.5" increments (both models)
• Cutter Blade: 0.1345 in. thick, milled edge, wear-resistant (both models)
• Blade Engagement: Blade control bar controlled Blade Brake Clutch (BBC), connected to cutter blade (both models)
• Discharge Opening: Rear-discharge with extra wide discharge opening (both models)
• Clutch Type: Heavy-duty Blade Brake Clutch (BBC) (both models)
• Optional Items/Attachments
• Mulching Plug: Included (both models)
• Fabric Grass Catcher: Included; 2.2 bushels (2.74 cu. ft.) (both models)
• Side-Discharge Adapter: Available accessory (both models)

Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

FRONT SWIVEL CASTER WHEELS

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Specification:

GENERAL

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire w/ glass-filled polypropylene wheel
• Front Tires: 9” x 2.25” rubber tire w/ glass-filled polypropylene wheel

DRIVE SYSTEM

• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

DECK

• Cutting Widths: 30″
• Type: Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup.
• Cutting Height: Adjustable from 1.5″ to 5″ in .25″ increments.
• Blade Type: Optimized for maximum performance whether discharging, mulching, or bagging
• Deck Lift: Hand lever. Single-point adjustment.
• Construction: 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts.
• Spindles: Aluminum housing with sealed ball bearings.
• Blade Engagement: Blade brake clutch allows operator to disengage cutter blades without shutting off the machine.
• Discharge, Mulch, Bag: Standard
• Bag Capacity: 2.5 Bushels

Product Dimensions

• Length – Transport (handles in upright transport position): 41″
• Length – Minimum (handles in highest operating position): 66″
• Length – Max (handles in lowest operating position): 73.5″
• Tracking Width: 28.75″
• Width (w/ discharge chute): 36.75″
• Width (w/ discharge block off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Max Operating: 45.25″
• Height – w/ Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs.
• Operating Weight – Mulching: 214 lbs.
• Operating Weight – Discharging: 213 lbs.

Description:

The power of a tiger with the swiftness of a cat, the nimble Tiger Cat® II combines the best of both worlds. Making full use of its compact footprint and robust engine, this easily adjustable and extremely durable machine gets into, around and out of tight spaces quickly—putting you on the path toward increased profitability.

48", 52" OR 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Product Dimensions

• 48″ Tiger Cat
• Length: 80″
• Width (chute down): 60.5″
• Width (chute in transport position): 49.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,175 lbs
• 52″ Tiger Cat
• Length: 80″
• Width (chute down): 64.5″
• Width (chute in transport position): 53.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,175-1,180 lbs
• 61″ Tiger Cat
• Length: 80″
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,257-1,277 lbs

GENERAL

• Total Fuel Capacity: 9.5 gallons
• Drive Tires:
• 24″ x 9.5″-12″ (48″ and 52″ models)
• 24″ x 12″-12″ (61″ model)
• Caster Tires: 13″ x 6.5″-6″, flat-free
• Seat: 4-point iso-mounted mid-back mounted on operator-suspension platform

DRIVE SYSTEM

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear 12 cc
• Motors: Parker 14.5 ci
• Forward Ground Speed: 12 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Foot-operated pedal

DECK

• Cutting Widths: Available in 48″, 52″, and 61″
• Type: Velocity Plus™
• Cutting Height: Adjustable from 1″ to 5″ in .25″ increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings.

Description:

The Scag Tiger Cat II is a zero-turn mower designed for professional landscapers who demand a machine that's both powerful and maneuverable. It combines the strength of a tiger with the nimbleness of a cat, allowing you to tackle tough jobs in tight spaces with unmatched efficiency.

Built for Endurance:

• Tri-Plate Deck Tops: The nearly half-inch thick steel deck construction (almost half an inch!) ensures exceptional durability, built to withstand heavy-duty use.
• Superior Cut Quality: The Velocity Plus™ deck with a special front baffle chamber and anti-scalp rollers delivers a clean, professional cut while preventing damage to your turf.
• Easy Maintenance: Features like replaceable wear pads and easy access points simplify keeping your mower in top condition.

Power and Control at Your Fingertips:

• Engine Options: Choose from a variety of engine options to match your power needs.
• Hydro-Gear Dual Pump and Motor Drive System: Delivers smooth operation and precise control for effortless maneuvering.
• Foot-operated Parking Brake: Provides convenient control when stopping or dismounting the mower.

Additional Highlights:

• Zero-Turn Design: Enables sharp turns around obstacles, maximizing your productivity.
• Adjustable Cutting Height: Allows you to customize the cut for different grass types and conditions. (1" to 5" in 0.25-inch increments)
• Comfortable Operator Platform: The mid-back seat mounted on an operator-suspension platform reduces fatigue during long working hours.
• The Scag Tiger Cat II is ideal for professional landscapers who need a powerful and agile zero-turn mower to handle demanding workloads. Its combination of durability, cutting performance, maneuverability, and operator comfort makes it a top choice for getting the job done efficiently.

Description:

It’s time for you to rise to the top of the food chain and tame turf with the Turf Tiger II™, a machine that’s tougher than any job you can throw at it. Engineered for superior durability, productivity and comfort, the Turf Tiger II gives you the edge over whatever nature throws at you while leaving you ready to take on the next challenge.

52", 61" OR 72" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Product Dimensions:

• 52″ Turf Tiger Gas / Propane
• Length: 80.5″
• Width (chute down): 64.5″
• Width (chute in transport position): 53.75″
• Height (ROPS down): 46.5″
• Height (ROPS up): 68″
• Weight: 1,418 lbs (Gas) / 1,486 lbs (Propane)
• 61″ Turf Tiger Gas / Propane / Diesel
• Length: 85.5″ (Gas / Propane) / 88″ (Diesel)
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS down): 46.5″ / 52.5″
• Height (ROPS up): 68″
• Weight: 1,496-1,538 lbs (Gas / Propane) / 1,606 lbs (Diesel) / 1,709 lbs (Diesel)
• 72″ Turf Tiger Gas / Diesel
• Length: 89.5″ (Gas) / 92″ (Diesel)
• Width (chute down): 83″
• Width (chute in transport position): 73.75″
• Height (ROPS down): 46.5″
• Height (ROPS up): 68″
• Weight: 1,556 lbs (Gas) / 1,739 lbs (Diesel)

GENERAL

• Total Fuel Capacity:
• 12 gallons (Gas/Diesel)
• 33.5 lb (LP)
• Drive Tires:
• 26″ x 12″-12″ (61″ and 72″)
• 26″ x 9.5″-12″ (52″)
• Caster Tires: 13″ x 6.5″-6″
• Seat: 4-point iso-mounted torsion-spring suspension seat

DRIVE SYSTEM

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear: 16 cc
• Motors: Parker: 18 ci
• Forward Ground Speed:
• 12 mph (Gas/LP)
• 10 mph (Diesel)
• Reverse Ground Speed: 6 mph
• Parking Brake: Adjustable foot-operated pedal. AUSCO disc brakes.

DECK

• Cutting Widths: Available in 52″, 61″, and 72″
• Type: Velocity Plus™
• Cutting Height: Adjustable from 1.5″ to 6″ in .25″ increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings.

Description:

It’s time for you to rise to the top of the food chain and tame turf with the Turf Tiger II™, a machine that’s tougher than any job you can throw at it. Engineered for superior durability, productivity and comfort, the Turf Tiger II gives you the edge over whatever nature throws at you while leaving you ready to take on the next challenge.

52", 61" OR 72" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Product Dimensions:

• 52″ Turf Tiger Gas / Propane
• Length: 80.5″
• Width (chute down): 64.5″
• Width (chute in transport position): 53.75″
• Height (ROPS down): 46.5″ / 52.5″
• Height (ROPS up): 68″
• Weight: 1,418 lbs (Gas) / 1,486 lbs (Propane)
• 61″ Turf Tiger Gas / Propane / Diesel
• Length: 85.5″ (Gas / Propane) / 85.5″ (Gas / Propane) / 88″ (Diesel)
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS down): 46.5″ / 52.5″ / 46.5″
• Height (ROPS up): 68″
• Weight: 1,496-1,538 lbs (Gas / Propane) / 1,606 lbs (Gas / Propane) / 1,709 lbs (Diesel)
• 72″ Turf Tiger Gas / Diesel
• Length: 89.5″ (Gas) / 92″ (Diesel)
• Width (chute down): 83″
• Width (chute in transport position): 73.75″
• Height (ROPS down): 46.5″
• Height (ROPS up): 68″
• Weight: 1,556 lbs (Gas) / 1,739 lbs (Diesel)

GENERAL

• Total Fuel Capacity:
• 12 gallons (Gas/Diesel)
• 33.5 lb (LP)
• Drive Tires:
• 26″ x 12″-12″ (61″ and 72″)
• 26″ x 9.5″-12″ (52″)
• Caster Tires: 13″ x 6.5″-6″
• Seat: 4-point iso-mounted torsion-spring suspension seat

DRIVE SYSTEM

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear: 16 cc
• Motors: Parker: 18 ci
• Forward Ground Speed:
• 12 mph (Gas/LP)
• 10 mph (Diesel)
• Reverse Ground Speed: 6 mph
• Parking Brake: Adjustable foot-operated pedal. AUSCO disc brakes.

DECK

• Cutting Widths: Available in 52″, 61″, and 72″
• Type: Velocity Plus™
• Cutting Height: Adjustable from 1.5″ to 6″ in .25″ increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings

Description:

Featuring a comfortable operator platform with first-class suspension that minimizes fatigue, the V-Ride II™ delivers a natural, intuitive and smooth riding position the entire day. With unrivaled performance, stability and durability, this machine helps keep you in tip-top condition to get the job done day after day, year after year.

48", 52" OR 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48″, 52″ and 61″ widths

Specification:

Model Description:

• Model: SVRII-61V-26CV-EFI
• Deck: 61" Velocity Plus™ Cutter Deck
• Engine: 26 HP Kohler® Command PRO® EFI (electronic fuel injection)

Product Dimensions:

• Length: 72.75 inches
• Tracking Width: 48 inches
• Width (Chute Down): 73.5 inches
• Width (Chute in Transport Position): 62.75 inches
• Height: 47.25 inches
• Weight: 1,127 - 1,173 lbs

General:

• Total Fuel Capacity:
• 5 gallons (32" model)
• 6.75 gallons (36" model)
• 8 gallons (48", 52", and 61" models)
• Drive Tires:
• 20" x 6.5"-10" (32" model)
• 20" x 8"-10" (36" model)
• 24" x 9.5"-12" (48" and 52" models)
• 24" x 12"-12" (61" model)
• Caster Tires:
• 11" x 4"-5" (32" and 36" models)
• 13" x 5"-6" (48" and 52" models)
• 13" x 6.5"-6" (61" model)
• Seat: Extra-large comfort cushion

Drive System:

• Drive System Type: Dual Pump and Motor
• Pumps:
• Hydro-Gear 10 cc (32" and 36" models)
• Hydro-Gear 12 cc (48", 52", and 61" models)
• Motors:
• Parker 12 ci (32" and 36" models)
• Parker 14 ci (48", 52", and 61" models)
• Forward Ground Speed:
• 8.5 mph (32" and 36" models)
• 10.5 mph (48", 52", and 61" models)
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever

Deck:

• Cutting Widths: 32", 36", 48", 52", and 61"
• Type:
• Advantage (32" and 36" models)
• Velocity Plus™ (48", 52", and 61" models)
• Cutting Height: 1.5" to 4.5" in 0.25" increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles. 32" model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings
• Blade Engagement:
• Ogura GT2.5 (150 ft lb) for 32", 36", 48", and 52" models
• Ogura GT3.5 (250 ft lb) for 61" model
• Adjustable Air-Gap: For extended life

Description:

48", 52" OR 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48″, 52″ and 61″ widths. An Advantage Cutter Deck is featured on 32″ and 36″ widths.

Ogura PTO Clutch Brake

STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE

Provides excellent starting and stopping power for the cutter deck and an adjustable air gap for long life.

Adjustable Operator Platform

EXPERIENCE AN UNMATCHED, ULTRA-COMFORTABLE RIDE

The spacious operator platform delivers a smooth ride and reduces operator fatigue. Adjustable suspension spring can be moved forward or backward, with, or without, the spacer plate installed to meet the operator’s comfort preference. Extra-large, extra-thick operator comfort cushion ensures comfortable operation, hour after hour.

Cutter-Deck Lift System

CONVENIENT, SPRING-ASSISTED LEVER

Cutter deck can be lifted and locked into transport position from the operator’s station. Cutting heights are easily set by placing the tethered pin at the desired height.

High-Strength Steel Frame

SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE

Heavy-duty, single-tube, steel main-frame construction delivers superior strength and ensures years of trouble-free service. The front caster-wheel weldments are replaceable.

Industrial-Grade Hydraulic System

SPEEDS UP TO 10.5 MPH

48″, 52″ and 61″ models: Dual Hydro-Gear pumps (12 cc) and Parker wheel motors (14 ci) deliver dependable power, with speeds up to 10.5 mph. Pump shock valves ensure reliability and long life. Cooling fans help maintain safe operating temperatures.

32″ and 36″ models: Dual Hydro-Gear pumps (10 cc) and Parker wheel motors (12 ci) deliver dependable power, with speeds up to 8.5 mph.

Ease of Maintenance

MORE UPTIME

Easy-to-remove covers, an unrestricted engine compartment, easy-to-reach grease Zerks and many more features make servicing the V-Ride™ II simple, so you can be in the shop less and on the job more.

Tiger Eye Advanced Monitoring System

KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS

Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat. (Tiger Eye not available on 32″ and 36″ V-Ride II models.)

Powerful and Efficient Engine Options

HUGE POWER, UP TO 40 HP

Choose from Briggs Vanguard and Kawasaki® powerplants; electronic fuel injection (EFI) options are available.

Specification

• Model Description
• SVRII-61V-37BV-EFI
• 61" Velocity Plus™ Cutter Deck, 37 HP Briggs Vanguard™ BIG BLOCK EFI - electronic fuel injection
• Product Dimensions
• Length: 72.75"
• Tracking Width: 48"
• Width (chute down): 73.5"
• Width (chute in transport position): 62.75"
• Height: 47.25"
• Weight: 1,127-1,173 lb
• General
• Total Fuel Capacity:
• 5 gallons (32" deck)
• 6.75 gallons (36" deck)
• 8 gallons (48", 52", and 61" decks)
• Drive Tires:
• 20" x 6.5"-10" (32" deck)
• 20" x 8"-10" (36" deck)
• 24" x 9.5"-12" (48" and 52" decks)
• 24" x 12"-12" (61" deck)
• Caster Tires:
• 11" x 4"-5" (32" and 36" decks)
• 13" x 5"-6" (48" and 52" decks)
• 13" x 6.5"-6" (61" deck)
• Seat: Extra-large comfort cushion
• Drive System
• Drive System Type: Dual Pump and Motor
• Pumps:
• Hydro-Gear 10 cc (32" and 36" decks)
• Hydro-Gear 12 cc (48", 52", and 61" decks)
• Motors:
• Parker 12 ci (32" and 36" decks)
• Parker 14 ci (48", 52", and 61" decks)
• Forward Ground Speed:
• 8.5 mph (32" and 36" decks)
• 10.5 mph (48", 52", and 61" decks)
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever
• Deck
• Cutting Widths: 32", 36", 48", 52", and 61"
• Type:
• Advantage (32" and 36" decks)
• Velocity Plus™ (48", 52", and 61" decks)
• Cutting Height: 1.5" to 4.5" in 0.25" increments
• Deck Lift: Hand lever
• Construction:
• Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel.
• Reinforcement plates at cutter deck spindles.
• 32" model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement:
• Ogura GT2.5 (150 ft lb) - (32", 36", 48", and 52" decks)
• Ogura GT3.5 (250 ft lb) - (61" deck)
• Adjustable air-gap for extended life.

Description:

48", 52" OR 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48″, 52″ and 61″ widths. An Advantage Cutter Deck is featured on 32″ and 36″ widths.

Ogura PTO Clutch Brake

STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE

Provides excellent starting and stopping power for the cutter deck and an adjustable air gap for long life.

Adjustable Operator Platform

EXPERIENCE AN UNMATCHED, ULTRA-COMFORTABLE RIDE

The spacious operator platform delivers a smooth ride and reduces operator fatigue. Adjustable suspension spring can be moved forward or backward, with, or without, the spacer plate installed to meet the operator’s comfort preference. Extra-large, extra-thick operator comfort cushion ensures comfortable operation, hour after hour.

Cutter-Deck Lift System

CONVENIENT, SPRING-ASSISTED LEVER

Cutter deck can be lifted and locked into transport position from the operator’s station. Cutting heights are easily set by placing the tethered pin at the desired height.

High-Strength Steel Frame

SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE

Heavy-duty, single-tube, steel main-frame construction delivers superior strength and ensures years of trouble-free service. The front caster-wheel weldments are replaceable.

Industrial-Grade Hydraulic System

SPEEDS UP TO 10.5 MPH

48″, 52″ and 61″ models: Dual Hydro-Gear pumps (12 cc) and Parker wheel motors (14 ci) deliver dependable power, with speeds up to 10.5 mph. Pump shock valves ensure reliability and long life. Cooling fans help maintain safe operating temperatures.

32″ and 36″ models: Dual Hydro-Gear pumps (10 cc) and Parker wheel motors (12 ci) deliver dependable power, with speeds up to 8.5 mph.

Ease of Maintenance

MORE UPTIME

Easy-to-remove covers, an unrestricted engine compartment, easy-to-reach grease Zerks and many more features make servicing the V-Ride™ II simple, so you can be in the shop less and on the job more.

Tiger Eye Advanced Monitoring System

KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS

Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat. (Tiger Eye not available on 32″ and 36″ V-Ride II models.)

Powerful and Efficient Engine Options

HUGE POWER, UP TO 40 HP

Choose from Briggs Vanguard and Kawasaki® powerplants; electronic fuel injection (EFI) options are available.

Specification:

Model Description

• SVRII-61V-38CV-EFI
• 61" Velocity Plus™ Cutter Deck, 38 HP Kohler® Command PRO® EFI – electronic fuel injection

Product Dimensions

• Length: 72.75"
• Tracking Width: 48"
• Width (chute down): 73.5"
• Width (chute in transport position): 62.75"
• Height: 47.25"
• Weight: 1,127-1,173 lb

General

• Total Fuel Capacity:
• 5 gallons (32" deck)
• 6.75 gallons (36" deck)
• 8 gallons (48", 52", and 61" decks)
• Drive Tires:
• 20" x 6.5"-10" (32" deck)
• 20" x 8"-10" (36" deck)
• 24" x 9.5"-12" (48" and 52" decks)
• 24" x 12"-12" (61" deck)
• Caster Tires:
• 11" x 4"-5" (32" and 36" decks)
• 13" x 5"-6" (48" and 52" decks)
• 13" x 6.5"-6" (61" deck)
• Seat: Extra-large comfort cushion

Drive System

• Drive System Type: Dual Pump and Motor
• Pumps:
• Hydro-Gear 10 cc (32" and 36" decks)
• Hydro-Gear 12 cc (48", 52", and 61" decks)
• Motors:
• Parker 12 ci (32" and 36" decks)
• Parker 14 ci (48", 52", and 61" decks)
• Forward Ground Speed:
• 8.5 mph (32" and 36" decks)
• 10.5 mph (48", 52", and 61" decks)
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever

Deck

• Cutting Widths: 32", 36", 48", 52", and 61"
• Type:
• Advantage (32" and 36" decks)
• Velocity Plus™ (48", 52", and 61" decks)
• Cutting Height: 1.5" to 4.5" in 0.25" increments
• Deck Lift: Hand lever
• Construction:
• Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel.
• Reinforcement plates at cutter deck spindles.
• 32" model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement:
• Ogura GT2.5 (150 ft lb) - (32", 36", 48", and 52" decks)
• Ogura GT3.5 (250 ft lb) - (61" deck)
• Adjustable air-gap for extended life.

Description:

Get more jobs done from dawn to dusk in more comfort than ever before with the SWZT, featuring ultra-comfortable, ergonomic controls that contour to your hands. Equipped with our legendary toughness and durability, it is packed with features that deliver incredible power, smooth operation, and a long lifespan.

Specifications:

• Length of cutter deck: 52 inches
• Engine type: Briggs & Stratton
• Engine power: 20 HP
• Engine start type: Electric start

Description:

Because every home deserves stripes, the Liberty® Z is designed and manufactured to deliver a top-of-the-line experience at a homeowner price point. A professionally-constructed mower, fit for your own lawn. The Liberty Z gives more people the chance to see why Scag® machines are Simply the Best.

STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE

The Ogura GT1 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 74 ft. lb. of holding strength, and an adjustable air gap for long life.

Liberty Z Model Specifications

Product Dimensions:

• 36″ Liberty Z:
• Length: 68.5″
• Width (Chute Down): 48.5″
• Width (Chute in Transport Position): 37″
• Height: 40″
• Weight: 555 lbs
• 42″ Liberty Z:
• Length: 68.5″
• Width (Chute Down): 54.5″
• Width (Chute in Transport Position): 43″
• Height: 41″
• Weight: 595 lbs
• 48″ Liberty Z:
• Length: 67.5″
• Width (Chute Down): 60.5″
• Width (Chute in Transport Position): 49″
• Height: 41″
• Weight: 612 lbs
• 52″ Liberty Z:
• Length: 67.5″
• Width (Chute Down): 64.5″
• Width (Chute in Transport Position): 53″
• Height: 41″
• Weight: 646 lbs
• 61″ Liberty Z:
• Length: 73.5″
• Width (Chute Down): 73.5″
• Width (Chute in Transport Position): 62″
• Height: 41″
• Weight: 695 lbs

General: