Description:

Featuring a comfortable operator platform with first-class suspension that minimizes fatigue, the V-Ride II™ delivers a natural, intuitive and smooth riding position the entire day. With unrivaled performance, stability and durability, this machine helps keep you in tip-top condition to get the job done day after day, year after year.

48", 52" or 61" Cutting Width

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48″, 52″ and 61″ widths. An Advantage Cutter Deck is featured on 32″ and 36″ widths.

Engines:

Commercial-Grade Power

The Briggs & Stratton® Vanguard® BIG BLOCK™ EFI engine found on select Scag® mower models is a proven performer with power and reliability. Features include:

• V-Twin OHV technology.
• Advanced debris management.
• Dual ball bearings.
• Dura-Bore cast-iron cylinder sleeve.
• Oxygen sensor—closed-loop system.
• High-pressure fuel-pump module.
• Electric-control module (ECU).
• Full-pressure lubrication with spin-on oil filter.
• Centrally located oil pump and pickup.
• Oil cooler.
• Heavy-duty cylinder and sump.
• High-efficiency head design.
• Lightweight piston and ring package.
• Dynamically balanced crankshaft.
• Five-inch, centrifugal, multi-stage air cleaner.
• Industrial-grade solenoid shift starter.
• Magnetron® electronic ignition.
• Engineered-resin blower housing, phase-modulated flywheel fan, and large-volume Super Lo-Tone muffler.

Specifications:

Product Dimensions

• Length: 69.5″
• Tracking Width: 48″
• Width (Chute Down): 65.25″
• Width (Chute in Transport Position): 53.75″
• Height: 47.25″
• Weight: 1,000-1,022 lbs

General

• Total Fuel Capacity: 8 gallons
• Drive Tires: 24″ x 9.5″-12″
• Caster Tires: 13″ x 5″-6″
• Seat: Extra-large comfort cushion

Drive System

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear 12 cc
• Motors: Parker 14 ci
• Forward Ground Speed: 10.5 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever

Deck

• Cutting Width: 52″
• Type: Velocity Plus™
• Cutting Height: 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings
• Blade Engagement: Ogura GT2.5 (150 ft-lb)
• Adjustable Air-Gap: Yes (for extended life)

Description:

Brains and brawn come together in this well-rounded professional chainsaw. The MS 362 C-M features the same great power, weight, and fuel efficiency as the MS 362, but it also features exclusive STIHL M-Tronic™ engine management technology. This innovative microprocessor-controlled engine management system optimizes engine performance and compensates for changes in operating conditions, such as temperature, elevation, fuel quality, and dirty air filters. It makes sure you’re working with optimal cutting power in any cutting condition.

Features:

• STIHL M-Tronic™ - This product features STIHL M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high-speed carburetor adjustment screws, compensates for dirty air filters and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in airflow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL® chainsaws are equipped with a chain-stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve,' vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.35 lbs.
• Guide Bar Length (Recommended): 25 in.
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz.
• Engine Power: 4.7 bhp
• Fuel Capacity: 20.3 oz.
• Displacement: 59.0 cc
• Intended Use: Professional

Note: STIHL® recommends #3624 (33 RS3-72) OILOMATIC® Saw Chain and 20” 3003 008 8921 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. Compatible guide bar ranges: 16" to 25".

Description:

Enjoy a smooth ride and take on tough jobs with the STIHL RZ 752i K zero-turn mower featuring an innovative suspension system with mowing deck height compensation and a 52” mowing deck for wide cutting swaths. The Kawasaki Electronic Fuel Injection (EFI) engine provides reliable operation and consistent power output, and the commercial-grade materials and components make this mower tough and durable.

Features:

• Kawasaki 26 hp EFI Engine with Electronic Throttle Control - The STIHL RZ 752i K and STIHL RZ 760i K feature a Kawasaki Electronic Fuel Injection (EFI) engine with engine throttle control which provides fuel-efficient operation.
• Commercial-Grade Hydro-Gear® ZT-4400 Transaxles - Hydro-Gear® ZT-4400 transaxles enable ten mph forward ground speed and five mph in reverse, helping allow for smooth and efficient cutting.
• Heavy-Duty 8” Cast Iron Greaseable Mower Deck Spindles - The STIHL RZ 700 Series’ eight-inch cast iron greaseable mower deck spindles are easy to maintain.
• Deluxe Seat with Armrests - Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity - With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers - Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation - Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers - The adjustable rear suspension with shock absorbers are designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System - Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports - Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) - The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan - Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height - Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter - Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute - Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders - Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch - This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Horsepower: 26 hp
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal.
• Displacement: 726 cc
• Transaxles: Hydro-Gear® ZT-4400
• Forward Ground Speed: 10 mph
• Reverse Ground Speed: 5 mph
• Deck Width: 52 in.
• Mowing Height Range: 1.5" - 5"
• Deck Construction: Fabricated from 10-gauge steel with a 10-gauge doubler in the spindle area and 1/2" reinforcement plates on the leading edge
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Front Tires: 13 x 6.5-6
• Rear Tires: 24 x 9.5-12
• Weight: 1,298 lbs
• Power Source: Gas
• Engine Governor: Electronic Throttle Control
• Spindle Shaft Diameter: 1 in.
• Spindle Bearings: 2.5" x 1" Dual Ball Bearing
• Spindle Hubs: 7.9" Cast Iron & Greaseable
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.68 in.
• Rear Suspension Travel: 2.68 in.

Description:

The STIHL® RZ 752i is built for hard work and operator comfort featuring a 52” mowing deck and an innovative suspension system that create a smooth, stable ride. The Vanguard® Electronic Fuel Injection (EFI) engine with MotoMix® provides fuel efficiency and extends maintenance intervals. Built with heavy-duty, commercial-grade materials and components, this mower is made to take on tough jobs.

Features:

• Vanguard® MotoMix® System – Vanguard® MotoMix® System features a separate oil tank, transferring cool oil to the engine—helping oil last longer, increasing working times, and allowing for less maintenance.
• Commercial-Grade Hydro-Gear® ZT-4400 Transaxles – Hydro-Gear® ZT-4400 transaxles enable ten mph forward ground speed and five mph in reverse, helping allow for smooth and efficient cutting.
• Heavy-Duty 8” Cast Iron Greaseable Mower Deck Spindles – The STIHL® RZ 700 Series’ eight-inch cast iron greaseable mower deck spindles are easy to maintain.
• Deluxe Seat with Armrests – Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity – With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers – Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation – Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers – The adjustable rear suspension with shock absorbers is designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System – Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports – Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) – The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan – Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height – Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter – Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute – Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders – Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch – This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America – A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Horsepower: 28 hp
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal.
• Displacement: 810 cc
• Transaxles: Hydro-Gear® ZT-4400
• Forward Ground Speed: 10 mph
• Reverse Ground Speed: 5 mph
• Deck Width: 52 in.
• Mowing Height Range: 1.5" - 5"
• Deck Construction: Fabricated from 10-gauge steel with a 10-gauge doubler in the spindle area and 1/2" reinforcement plates on the leading edge
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Front Tires: 13 x 6.5-6
• Rear Tires: 24 x 9.5-12
• Weight: 1,319 lbs.
• Power Source: Gas
• Engine Governor: Mechanical
• Lubrication System: Oil Guard™ with 500-Hour Service Interval
• Spindle Shaft Diameter: 1 in.
• Spindle Bearings: 2.5" x 1" Dual Ball Bearing
• Spindle Hubs: 7.9" Cast Iron & Greaseable
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.68 in.
• Rear Suspension Travel: 2.68 in.

Description:

With an advanced suspension system and a commercial-grade 60” mowing deck, the STIHL RZ 560 K zero-turn mower is built for durability, operator comfort, and a long life span. The two-belt deck pulley system reduces stress on each belt to keep the 24 hp Kawasaki engine running cooler with less maintenance. The Hydro-Gear® ZT-3400 transaxles enable ten mph forward ground speed and five mph in reverse, allowing for smooth and efficient cutting.

Features:

• Kawasaki 24 hp Carbureted Engine - The STIHL RZ 552 K and STIHL RZ 560 K zero-turn mowers feature a reliable 24-hp Kawasaki carbureted engine.
• Commercial-Grade Hydro-Gear® ZT-3400 Transaxles - Hydro-Gear® ZT-3400 transaxles enable ten mph forward ground speed and five mph in reverse, allowing for smooth and efficient cutting.
• Greaseable Mower Deck Spindles - Greaseable mower spindles allow for user maintenance and extend the life span of each spindle.
• Deluxe Seat with Armrests - Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity - With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers - Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation - Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers - The adjustable rear suspension with shock absorbers are designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System - Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports - Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) - The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan - Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height - Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter - Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute - Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders - Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch - This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Horsepower: 24 hp
• Fuel System: Carbureted
• Fuel Tank Capacity: 5.5 gal
• Displacement: 726 cc
• Transaxles: Hydro-Gear® ZT-3400
• Forward Ground Speed: 10 mph
• Reverse Ground Speed: 5 mph
• Deck Width: 60 in
• Mowing Height Range: 1.5" - 5"
• Deck Construction: Fabricated 10-gauge steel with 3/8" reinforcement plates
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Front Tires: 13 x 6.5-6
• Rear Tires: 23 x 10.5-12
• Weight: 1,291 lbs
• Power Source: Gas
• Engine Governor: Kawasaki FT730V
• Spindle Shaft Diameter: 1 in.
• Spindle Bearings: 2.5" x 1" Dual Ball Bearing
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.05 in.
• Rear Suspension Travel: 2.68 in.

Description:

When we developed the Stander® ZK, nothing was held back! The result is the most productive and versatile large frame mower ever built. Big-bore EFI engines provide power without compromising efficiency. High flow hydraulics propel high traction 23” or 24” tires for excellent hill holding, and dual-sided fuel tanks provide all-day run time. Take on your next season with a ZK. It’s the ultimate stand-on mower. Period.

Specifications:

• Stock Number: WSZK52S61G83B
• Make: Wright
• Model: Stander ZK
• Condition: New
• Color: Yellow
• CUTTING
• Deck Size: 52"
• ENGINE
• Engine: Vanguard™ BIG BLOCK™ EFI
• Horsepower: 40 HP
• Fuel Type: Gas
• CATEGORY
• Main Category: Stand On Mowers
• All Mowers: All Mowers
• Commercial or Residential: Commercial

Description:

The Husqvarna Z200 ClearCut Triple Bagger is a high-performance leaf blower vacuum and mulcher designed for professionals and serious homeowners. This powerful machine is designed to make quick work of leaves, grass clippings, and other debris, with a clearing width of up to 21 inches and a vacuum capacity of 1.4 bushels.

Features:

• 200cc Husqvarna engine provides reliable power and performance
• Variable speed control allows for precise control over blowing speed and vacuum suction
• Triple-bag design allows for easy emptying and minimal mess
• 21-inch clearing width and 12-foot hose length provide efficient coverage
• 1.4 bushel vacuum capacity reduces disposal trips and saves time
• Mulching ratio of 17:1 reduces volume of material to be disposed of
• Emissions-compliant engine meets EPA regulations

Description:

Genuine Honda GX120 HX2, UT3 Engine 3/4" Horizontal Shaft with Oil Alert 6:1 Gear Reduction Gear Box Honda GX120 UT3 HX2 for Quarter Midget Racing. These engines are sold individually, but if you would like to purchase per pallet, please give us a call or send us an email (Qty. 12 per pallet). Factory Honda Boxes are opened by HPD to add additional packing foam. FOR RACING USE ONLY Honda’s GX series engines are legendary for superior reliability and performance. And there’s no doubt about it: the GX120 lives up to the legend. Lower noise levels, lower vibration, and lower emissions – without sacrificing power output or performance.

COMMON APPLICATIONS

Commercial lawn and garden equipment Tillers / cultivators Generators Construction / industrial equipment Agricultural equipment Water pumps Specifications Engine Type Air-cooled 4-stroke OHV Bore x Stroke 60 X 42 mm Displacement 118 cm3 Net Power Output* 3.5 HP (2.6 kW) @ 3,600 rpm Net Torque 5.4 lb-ft (7.3 Nm) @ 2,500 rpm PTO Shaft Rotation Counterclockwise (from PTO shaft side) Compression Ratio 8.5:1 Lamp/Charge coil options 25W, 50W Carburetor Butterfly Ignition System Transistorized magneto Starting System Recoil Lubrication System Splash Governor System Mechanical Air cleaner Dual Element Oil Capacity 0.59 US qt. (0.56 L) Fuel Tank Capacity 2.1 U.S. qts (2.0 liters) Fuel Unleaded 86 octane or higher Dry Weight 29 lbs. (13.0 kg) PTO SHAFT OPTIONS L type Reduction type PTO Q type Straight shaft S type Straight shaft (metric) T type Straight shaft AR type Rammer

DIMENSIONS

Length (min) 11.7” (297 mm) Width (min) 13.6” (346 mm) Height (min) 13.0” (329 mm) Fuel Efficient, High Output Operation Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel efficiency OHV design for increased efficiency and optimal power transfer High compression ratio for better fuel efficiency Smooth Performance Precision engineered components result in lower vibration Ball bearing supported crankshaft for greater stability Exceptionally Quiet Even quieter than previous model! Large capacity, multi-chamber exhaust system Reduced mechanical noise due to light weight, noise-reducing materials Forged steel crankshaft and rigid crankcase Helical cut gears Sophisticated air intake system Proven Reliability Oil Alert New carburetor chamber coating and carburetor filter help to protect against fuel impurities Cast iron cylinder sleeve High quality materials, fit, and finish Dual element air cleaner Fuel Valve 3-Year Limited Warranty Easy To Use and Maintain Simple throttle control Large fuel tanks Large automotive type fuel cap Dual oil drains and fill Easy, convenient, heavy duty control box Easily accessible spark plug Easy Starting Heavy duty recoil starter Ergonomic, easy to grip recoil rope design Automatic mechanical de-compression system Emissions Compliant Lower emissions, same power output! CARB and EPA certified No catalyst necessary Common Applications Pressure washers Commercial lawn and garden equipment Tillers / cultivators Generators Construction / industrial equipment Agricultural equipment Small vehicles Water pumps Common Applications Commercial lawn and garden equipment Tillers / cultivators Generators Construction / industrial equipment Agricultural equipment Water pumps

Description:

Features:

• Ideal for TV, DVD, satellite, fridge, coffee pot, & more
• Super quiet & lightweight
• Inverter - stable power
• Honda My Generator app + Bluetooth® capability
• CO-MINDER: advanced carbon monoxide detection system

Specifications:

• Engine: Honda GXR120
• Displacement: 121cc
• AC Output:
• 120V, 2200W max (18.3A)
• 1800W rated (15A)
• Receptacles: 20A 125V Duplex
• DC Output: N/A
• Starting System: Recoil
• Fuel Tank Capacity: 0.95 gal
• Run Time per Tankful:
• 3.2 hrs at rated load
• 8.1 hrs at 1/4 load
• Dimensions (L x W x H): 20.0" x 11.4" x 16.7"
• Noise Level:
• 57 dB(A) at rated load
• 48 dB(A) at 1/4 load
• Dry Weight: 47.4 lb
• Residential Warranty: 3 years
• Commercial Warranty: 3 years

Description:

Only Honda lawn mowers provide the legendary combination of durability, reliability, and innovation, and the HRN216VYA Walk-Behind Mower is no exception. Powered by a famously quiet, efficient, and easy-starting four-stroke engine, these push mowers are built from the ground up to match the ideal engine with select features that make your lawn care experience a breeze. You’ll get more power and performance for a superior walk-behind mower and a better looking lawn.

Like many models in the Honda user comfort is a top priority. That’s why they’re optimized for improved bagging & mulching, offer quick and convenient adjustments, and boast variable speed Smart Drive control*. Because we pride ourselves on offering a family of mowers for true lawn lovers.

• Cutting Width: 21 In.
• Cutting Height: 1 – 4 In.
• Drive Control: Variable Speed Smart Drive
• Ground Speed: 0 – 4 MPH

Features:

Roto-Stop®: Stop the blades without stopping the engine

Conveniently stops the blades without stopping the engine. Perfect for emptying the bag or removing debris.

Smart Drive Self Propel

Intuitive, variable speed control while mowing. Five adjustable positions for user comfort. Variable speeds from 0 to 4 MPH.

Superior mulching and bagging

The HRN mowers offer superior cut quality whether you’re mulching or bagging, even in tough mowing conditions.

3-in-1 system with Clip Director®

Simply slide the Clip Director® for mulching, bagging, or discharging versatility. No attachments required.

MicroCut® Twin Blades System

Stacked and offset twin blade design provides superior cut quality and smaller clippings for better mulching and bagging.

Honda GCV170 Engine

Reliable, easy starting power to tackle the toughest mowing conditions.

Honda Auto Choke™ System for easy starting

No engine choke required! Just start the mower and go.

Easy Fold quick release handle for easy height adjustment and storage

Easily adjust the handle to 2 comfortable mowing positions, or fold over for storage.

Improved maneuverability

2-way ratchet system improves maneuverability and reduces effort to turn in a tight radius, drastically reducing pull-back force.

Dual-lever height adjustment system

User-friendly levers conveniently adjust for 7 cutting heights (from 1 to 4 inches).

Heavy-duty 21-inch steel deck

Innovative Honda design optimizes air flow for superior mulching and bagging.

Easy maintenance

Smart Engine Layout offers a large fuel tank spout, easy oil changes, and easy access to spark plug and air filter.

8-inch high traction wheels

Excellent traction in a variety of mowing conditions.

Large easy-off 1.9-bushel grass bag

Our large capacity grass bags are balanced so they are easy to empty, saving you time and effort.

Manual fuel shut-off valve

The fuel valve can be shut off for transport, storage, or to perform maintenance.

3 year residential/90 day commercial warranty

Specification:

Engine: GCV170

Deck Material: 16-Gauge Steel

Cutting Width: 21 In.

Mowing Height Range: 1 – 4 In.

Mowing Height Adjustment Positions: 7

Drive Control: Variable Position Smart Drive

Transmission: Variable Speed Fixed Gear Belt Clutch

Ground Speed: 0 – 4 MPH

Starter: Recoil

Choke System: Automatic

Drive: Slipping Belt

Handle: 1 In. Steel Tube

Handle Height Positions: 2

Wheels: 8 In. Plastic

Wheel Ball Bearings: Sintered Metal Bushing (Rear Only)

Standard Functions: 3-in-1 (Mulch, Bag, Discharge)

Bag: Standard

Bag Capacity: 1.9 Bu

Blade(s): Twin Blades (MicroCut System®)

Blade Control: Blade Stop System (Roto-Stop®)

Side/Rear Discharge: Rear (Standard)

Dry Weight: 88 Lbs

Operating Weight: 90 Lbs

Residential Warranty: 3 Years

Commercial Warranty: 90 Days

CA Compliant: Yes

Description:

The BRA 600 battery-powered blower, compatible with the AP 500 S battery, features an exceptional power-to-weight ratio for heavy-duty work and optimal operator comfort. The radial fan motor with Noise Reduction System allows users to operate in noise-sensitive areas. The HMI display puts diagnostics and applications like cruise control right at your fingertips. With four speed levels including Boost and ECO modes, this blower allows for customized performance. Comfort features like cruise control and the three-point harness with optional lap belt help optimize operator comfort. Engineered with IPX4-rated weather-resistant construction, this powerhouse is designed and tested for splash-water protection.

Features:

• 72 V Brushless Motor - The BRA 600 is capable of an output of 35 N of blowing force on boost mode for moving wet leaves and debris and four speeds including: ECO mode, mid-level, full performance, and boost mode.
• Radial fan motor with Noise Reduction System - The radial fan motor with Noise Reduction System helps keep noise at 64 decibels, allowing users to operate in noise-sensitive areas
• Constant Power - The BRA 500/600 gives users constant powerful performance with no drop-off in power (in standard mode)
• Deluxe HMI Control - The BRA 500/600 comes with a convenient HMI display and control panel right at your fingertips so you can monitor diagnostics like battery life and control various applications such as the cruise control and power level.
• Ergonomic, Comfortable Design - The BRA 500/600 is designed with operator comfort in mind, featuring an anti-vibration system and a three-point harness with optional lap belt for ergonomic use and optimal user comfort.
• Power-to-Weight Ratio - The BRA 500/600 features an exceptional power-to-weight ratio so users can take on heavy-duty work like wet leaves and debris while carrying less than 32lbs on their back
• Two Nozzles Included - Users can customize the blower for different applications with the included volume nozzle for large quantities of dry debris and the air speed nozzle for wet debris.
• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Soft-Grip Handle - This handle design provides a firm and comfortable grip.
• Boost Mode - Activating the second stage of the throttle delivers maximum air velocity no matter which power level.
• Adjustable Harness - The BRA 600 and BRA 500 are designed with operator comfort in mind, featuring an anti-vibration system and an adjustable support harness for ergonomic use and optimal user comfort.

Specifications:

• Power Source: Battery
• Battery System: AP System
• Weight: 22.5 lbs.
• Weight (w/ 2 AP 500 S): 32 lbs.
• Blowing Force (Standard Mode): 34 Newtons
• Maximum Air Velocity: 246 mph
• Air Volume at Nozzle: 789 cfm
• Sound Pressure Rating: 64 dB(A)
• Run Time (w/ 2 AP 500 S): 17 min.

Description:

The BGA 160 battery-powered blower features a constant running power capable of 21 N of force with no drop-off in power as the battery charge reaches depletion. The innovative, ergonomic shape of the angled blower tube provides a natural working position, and the easy-to-use cruise control allows users to set the speed and remove their finger from the trigger so they can focus on the job at hand. With a virtually maintenance-free brushless motor and weather-resistant design, the BGA 160 is not only powerful, but also built to stand the test of time.

Features:

• Constant Power - Internal technology maintains constant power output during standard operation (non-boost) until at 10% a power reduction indicates the need for battery recharge.
• Variable-Speed Trigger - The variable-speed trigger allows precise control for each task.
• Boost Mode - Using the variable-speed trigger, users can easily activate boost mode to temporarily increase to the maximum blowing force for extra power when needed for tasks like clearing wet leaves or grass.
• Easy-to-Use Cruise Control - Features an easy-to-use cruise control function for more comfortable operation on longer projects
• Reduced Noise - Users can operate in noise-sensitive areas or areas with noise ordinances thanks to the reduced noise of the BGA 160 compared to its gas counterparts.
• High Power-to-Weight Ratio - This feature allows users to get more done by minimizing fatigue.
• Ergonomically Designed - Featuring an ergonomically shaped blow tube pitched at an angle, the BGA 250 is designed with user comfort in mind.
• Lightweight Design - At only 9.7 lbs. with AP 300 S battery, the lightweight design helps reduce operator fatigue.
• Quiet Operation - BGA 160 - At 83 decibels, a noise level equivalent to a crowded restaurant, this tool’s quiet operation is ideal for noise-sensitive areas
• Instant-On Performance - 100% torque instantly with the squeeze of a trigger
• Rubberized Soft-Touch Handle - Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods.
• Hanging Loop - The built-in hanging loop allows for easy wall-mount storage.
• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Brushless Motor - The advanced brushless motor virtually eliminates maintenance while supplying the power and performance you expect from STIHL®.

Specifications:

• Power Source: Battery
• Battery System: AP System
• Weight: 5.7 lbs.
• Weight (w/ AP 300 S): 9.7 lbs.
• Blowing Force (Standard Mode): 21 Newtons
• Maximum Air Velocity: 170 mph
• Air Volume at Nozzle: 550 cfm
• Sound Pressure Rating: 83 dB(A)
• Run Time (w/ AP 300 S, Boost Mode): Up to 15 min.

Description:

Specifications:

• Model: 24" RSN C83
• SKU: 970 69 67‑24
• Chain Speed at Max Power: 70.2 ft/s
• Cylinder Displacement: 3.65 cu. inch
• Output Shaft Power: 4.7 hp
• Dimensions
• Weight (Excl. Cutting Equipment): 13 lbs
• Equipment
• Recommended Bar Length (Min): 15 in
• Recommended Bar Length (Max): 28 in
• Pitch: 3/8"
• Chain Type: C83
• Bar Length: 60 cm (24 in)
• Emissions
• Exhaust Emissions (CO₂ EU V): 778 g/kWh
• Vibration Levels
• Front Handle: 4 m/s²
• Rear Handle: 4.5 m/s²
• Sound and Noise Levels
• Sound Pressure Level at Operator’s Ear: 107 dB(A)
• Sound Power Level (Guaranteed - LWA): 118 dB(A)

Description:

The STIHL® RZ 960i K zero-turn mower features a Kawasaki Electronic Fuel Injection (EFI) engine and electronic throttle control for fuel efficiency and easy operation. The 60" mowing deck and top-of-the-line suspension system with mowing deck height compensation help operators get the job done well while also prioritizing comfort. Built with heavy-duty, commercial-grade materials and components, this mower is made for hard work.

Note: Not available for purchase or delivery in California

Features:

• Kawasaki 38.5 hp EFI Engine and Electronic Throttle Control - The 38.5 hp STIHL® RZ 960i K and STIHL® RZ 972i K feature a Kawasaki Electronic Fuel Injection (EFI) engine and electronic throttle control which provides fuel-efficient and easy operation.
• Commercial-Grade Hydro-Gear® ZT-5400 Transaxles Include 9" Cooling Fans - Hydro-Gear® ZT-5400 transaxles offer a top forward ground speed of twelve mph and a top reverse speed of five mph, as well as nine inch cooling fans to prevent overheating.
• Heavy-Duty 10" Cast Iron Greaseable Mower Deck Spindles with Taper Lock Pulleys - The STIHL® RZ 900 Series features taper lock spindle pulleys to ensure perfect belt alignment and the tightest fit between the pulley and spindle to ensure a long service life.
• Premium Suspension Seat - The STIHL® RZ 900 Series features a premium suspension seat with adjustable backrest, adjustable lumbar support, and adjustable armrests.
• Large Fuel Capacity - With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers - Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation - Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers - The adjustable rear suspension with shock absorbers are designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System - Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports - Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) - The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan - Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height - Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter - Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute - Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders - Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch - This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Engine & Power
• Horsepower: 38.5 hp
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal.
• Displacement: 999 cc
• Engine Governor: Electronic Throttle Control
• Transmission & Speed
• Transaxles: ZT-5400 Hydro-Gear® with 9" cooling fans
• Forward Ground Speed: 12 mph
• Reverse Ground Speed: 5 mph
• Cutting System
• Deck Width: 60 in.
• Mowing Height Range: 1.5" - 5"
• Deck Construction: 10-gauge steel with additional reinforcement
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened
• Wheels & Suspension
• Front Tires: 13 x 6.5-6 – Flat Free
• Rear Tires: 26 x 12-12
• Front Suspension Travel: 2.68 in.
• Rear Suspension Travel: 2.68 in.
• Build & Additional Features
• Weight: 1,621 lbs.
• Power Source: Gas
• Spindle Bearings: 2.5" x 1.18" Double Row Angular Ball Bearings
• Spindle Hubs: 10" Cast Iron & Greaseable
• USB Amperage: 3.15 A

Description:

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

EASY HEIGHT-OF-CUT ADJUSTMENT

FINE-TUNED AND SIMPLE

Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.

Engines

Honda GXV160 Engine

Designed specifically to meet the demands of professionals working in commercial landscaping and other related industries, the Honda GXV160 delivers reliability and efficiency from dusk until dawn. Engineered with precision for smoother performance and quiet operation, this 4-stroke single cylinder engine features an OHV design for increased efficiency and optimal power transfer and is easy-to-start because of its automatic decompression system.

Features:

• Air-cooled, 4-stroke OHV 163 cc engine
• High power-to-displacement ratio
• High quality materials and purpose-built components ensure reliable long-term use
• Engineered for low vibration and quieter noise levels
• Easy starting with an automatic decompression system
• Large fuel tank and superior fuel efficiency for less downtime
• EPA certified

Specifications:

• Product Dimensions
• Length in Operating Position: 63.0 – 68.5 inches (both models)
• Length in Storage Position: 41 inches (both models)
• Tracking Width: 21.2 inches (both models)
• Width: 23.25 inches (both models)
• Height in Operating Position: 32.75 inches (low) / 43.5 inches (high)
• Height in Storage Position: 22 inches (both models)
• Weight (without bagger): 132 lb (SFC-21-5CV), 138 lb (SFC-21-7CV)
• Weight (with bagger): 137 lb (SFC-21-5CV), 143 lb (SFC-21-7CV)
• General Specifications
• General Type: Heavy-duty industrial/commercial (both models)
• Brand: Kohler® Command PRO® (both models)
• Model: CV173 (SFC-21-5CV), CV224 (SFC-21-7CV)
• Horsepower: 5HP @ 3300 RPM (SFC-21-5CV), 7HP @ 3300 RPM (SFC-21-7CV)
• Engine Type: 4-cycle gas, OHV, air-cooled, single-cylinder, vertical shaft (both models)
• Displacement: 173 cc (SFC-21-5CV), 224 cc (SFC-21-7CV)
• Cylinder: One with cast-iron cylinder bore (both models)
• Governor: Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm (both models)
• Air Cleaner: Quad-Clean™ four-stage, cyclonic air filter (both models)
• Exhaust: Side discharge muffler with guard (SFC-21-5CV), Front discharge muffler with guard (SFC-21-7CV)
• Oil Pump Group: Steel oil pump; Full pressure lubrication with spin-on oil filter (both models)
• Starter/Electrical: Easy-Pull™ recoil start (both models)
• 50-State Compliant: Yes (both models)
• Engine Deck & Fuel Tank
• Engine Deck Thickness: 14 gauge (both models)
• Fuel Tank Capacity: 0.37 gallon (1.4 liters) plastic tank (SFC-21-5CV), 1 gallon (3.785 liters) plastic tank (SFC-21-7CV)
• Wheels & Tires
• Drive Tires: 10.5 x 3 (both models)
• Front Tires: 9 x 2.25 (both models)
• Handlebars & Drive System
• Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable (both models)
• Transmission: GT MG 512 transmission, 3-speed (both models)
• Steering/Travel Control: Variable drive control bar and 3-speed selector lever on handlebar (both models)
• Transmission Output Shaft: 0.50" diameter (both models)
• Safety & Forward Speed
• Safety Group: Handle actuated operator presence system (both models)
• Forward Speed: Up to 4.25 mph (both models)
• Cutter Deck
• Cutter Deck Type: High-vacuum, high-capacity design (both models)
• Deck Construction: 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped (both models)
• True Cutting Width: 21 inches (53.34 cm) (both models)
• Cutting Height Adjustment: 1.5" to 4.5" in 0.5" increments (both models)
• Cutter Blade: 0.1345 in. thick, milled edge, wear-resistant (both models)
• Blade Engagement: Blade control bar controlled Blade Brake Clutch (BBC), connected to cutter blade (both models)
• Discharge Opening: Rear-discharge with extra wide discharge opening (both models)
• Clutch Type: Heavy-duty Blade Brake Clutch (BBC) (both models)
• Optional Items/Attachments
• Mulching Plug: Included (both models)
• Fabric Grass Catcher: Included; 2.2 bushels (2.74 cu. ft.) (both models)
• Side-Discharge Adapter: Available accessory (both models)

Description:

The SHA 140 is the most powerful shredder vac in the STIHL® lineup. It features a 14:1 reduction ratio and up to 60 minutes of run time when paired with the AP 300 S battery. The robust, metal buckles and Quick Disconnect feature make cleaning and maintenance simple. With durable, weather-resistant construction and trusted STIHL® engineering, the SHA 140 is built for tough work.

Features:

• Metal Blades - The metal blades provide a 14:1 shredding ratio to help users get more accomplished per work session.
• Buckles Instead of Zipper - The robust, metal buckles make it easier to completely empty the bag.
• Deflection Engineered Suction Pipe - The purposefully designed deflection suction pipe prevents the pipe from getting stuck to the ground, allowing for less downtime and more efficiency.
• Boost Mode - The boost mode function, activated by an easy-to-access lever, allows you to exert more power for heavy-duty applications.
• Quick Disconnect - The tool-free Quick Disconnect feature allows users to easily open and clean the bag and pipe.
• Run Time Up To 60 min. with AP 300 S - The SHA 140 features up to 60 minutes of run time when paired with the AP 300 S battery.
• Air Flow Management System - The air flow management system keeps the suction power constant even when the bag is full.
• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Shoulder Strap - The STIHL® shoulder strap allows for greater maneuverability and helps reduce operator fatigue, allowing the user to work comfortably.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Quiet Operation - This product is ideal for noise-sensitive areas.
• Soft Grip Handle - The soft grip handle provides added comfort.
• Compact, Ergonomic Design - The compact, ergonomic design provides more comfortable use.

Specifications:

• Power Source: Battery
• Weight: 11.2 lbs. (without battery)
• Weight (with AP 300 S): 15.2 lbs.
• Bag Capacity: 55 L
• Run Time (with AP 300 S): Up to 60 minutes
• Run Time (with AP 300 S in Boost Mode): 38 minutes
• Shredding Ratio: 14:1

Description:

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

Specifications:

• Engine: 7HP @ 3300 RPM, 4 cycle gas, OHV, air-cooled, single-cylinder, vertical shaft
• Transmission: GT MG 512 transmission, 3-speed
• Wheels/Tires: Drive: 10.5 x 3 / Front: 9 x 2.25
• Handle Bars: 1″ diameter, thick wall tubing, 3-position adjustable
• Safety Group: Handle actuated operator presence system
• Forward Speed: Up to 4.25 mph
• Cutting Width: 21 inches (53.34 cm)
• Cutting Height Adjustment: 1.5″ to 4.5″ in 0.5″ increments
• Cutter Blade: 0.1345 in. thick, milled edge, wear resistant

Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Engines

Kohler Command PRO CV224 Engines

With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.

Features include:

• Torque output: 11.0 ft-lbs
• 3-year limited commercial warranty
• Enjoy effortless starts thanks to our Easy-Pull™ technology
• Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
• Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
• Cast-iron cylinder liners add durability and engine protection

Specifications:

Dimensions & Weight

• Length – Transport (handles in upright transport position): 41″ / 44″
• Length – Minimum (handles in highest operating position): 66″ / 69″
• Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
• Tracking Width: 28.75″
• Width (with discharge chute): 36.75″
• Width (with discharge block-off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Maximum Operating: 45.25″
• Height – Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs. / 233 lbs.
• Operating Weight – Mulching: 214 lbs. / 227 lbs.
• Operating Weight – Discharging: 213 lbs. / 226 lbs.

General Specifications

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
• Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel

Drive System

• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 30″
• Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
• Cutting Height: 1.5″ to 5″ in 0.25″ increments
• Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
• Deck Lift: Hand lever, single-point adjustment
• Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)

Discharge, Mulch, & Bagging

• Standard Discharge, Mulch, & Bagging: Yes
• Bag Capacity: 2.5 Bushels

On sale now! Please call/text for availability. 

Speeco 35ton Log Splitter CH395

PP35TKO-1 - Kohler engine

Description:

61" cut / 40.0hp Vanguard 61G8 EFI, Gen 3.

Specifications:

• Model: WSZK61S61G83B
• Shipping Weight: 1200lbs
• Manufactured by: Wright

Description:

WRIGHT WSLG61SFX8501B STANDER LG 61 FX850E — STAND-ON COMMERCIAL MOWER SIMPLE & DURABLE The STANDER LG is part of our new generation of fully optimized Standers. Built in the spirit of our original large-frame fixed deck Stander known for its ruggedness. Profoundly simple and solid, offering you the best combination of performance, versatility, compact footprint, and low operating cost. Ideal for fleet operations.

Features:

• New platform

• Trash bucket

• Upholstered pad

• The ZT-4400 transmission is the sweet spot in terms of size, cost, and heat stabilization.

• 360 degree viewing angles without sacrificing performance.

• “C” mounting makes it easier to swap out transmissions, much like the ZXL.

• Deck and belts

• Heavier front guard protects engine and muffler.

• Larger frame

• Large single gas tank allows for lots of run time at a better price.

• Sealed caster bearings and height adjustable caster yoke.

• New flat back Aero Core deck Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specifications:

• Model: Stander LG 61 FX850E
• SKU: WSLG61SFX8501B
• Category: Stand-On
• Family: Stander LG
• Class: Heavy-duty
• Generation: Gen 1

Controls:

• Operator Control Type: Quad Lever Ball Bearing
• Hour Meter: Digital

Engine:

• Vendor: Kawasaki
• Model: FX850E
• Start Type: Electric
• Horsepower: 27 hp

Productivity:

• Forward Speed: 12.5 mph
• Reverse Speed: 8 mph
• Fuel Capacity: 11 gal
• Max Acres Per Hour: 7.7

Drive System:

• Type: Hydro
• Motor: Not Applicable
• Pump: Not Applicable
• Transaxle: Hydro-Gear ZT4400
• Transmission: Not Applicable

Deck:

• Deck Size: 61 in
• Deck Type: Floating-side discharge
• Configuration: Aero Core
• Lift System: Quick-Cut
• Blade Quantity: 3
• Blade Length: 21 in
• Min. Cut Height: 1.75 in
• Max. Cut Height: 5.75 in
• Steel Gauge: 7 gauge
• Spindle Type: Ductile Iron

Dimensions:

• Weight: 1,180 lbs
• Length: 71.50 in
• Width with Deflector Down: 74.50 in
• Width with Deflector Up: 62.00 in

Caster Wheels:

• Rim Diameter: 6.00 in
• Tire Diameter: 13.00 in
• Tire Width: 5.00 in

Rear Wheels:

• Rim Diameter: 12.00 in
• Tire Diameter: 24.00 in
• Tire Width: 12.00 in

Description:

The PC160RB-2529BXD is built for the homeowner or light commercial user that appreciates quality and durability in their outdoor power equipment. This unit comes equipped with some of the same components you find in the higher end pressure washers, but at an entry level price. Powered by a GC160 Honda Engine and a Comet BXD Axial pump, this model comes with a 2 year residential engine warranty and a 1 year pump warranty. All Top Gun pressure washers come standard with flat free tires, 4000 psi Rated 3/8” hose, 5 cleaning nozzles, and quick connect fittings.

Specifications:

• PSI Rating: 2900 PSI
• Water Flow: 2.5 gal/min
• Engine: Honda GC160 (160cc) with recoil start, 2-year residential warranty, and 90-day commercial warranty
• Pump: Comet BXD Axial Pump, 1-year pump warranty
• Hose: 25ft, 4000 PSI, wire braided rubber
• Frame: Heavy-duty frame with 2 – 10” flat-free steel rim tires, anti-vibration rubber feet

Description:

2020 Wright Stander B 48 FS651E (WSB48SFS651E1B)

Key Features

Ideal for the entry-level landscaper or part-time professional

Basic & Productive

The all new Stander® B gives the operator the performance that Wright Standers are known for, in a much higher value package! Designed with the entry-level landscaper or part-time professional in mind, the Stander B is compact, maneuverable, easy to use, and low maintenance.

Specifications

Engine: Kawasaki FS651 22hp

Deck: 48"

Transmission: Hydro-Gear zt-3100

Fuel Capacity: 5 Gallons

Speed: 7 MPH

Acres/Hour: 3.3

Rear tires: 20x10-8

Front tires: 11x4-5

Length 65.75"

Width: 49"

Weight: 780lbs

Cut Height Range: 2" - 5" Floating

Construction: Square Nosed 11 Gauge Laminate

Blades: 3 x 16.5

The Honda HRC216K3HDA self-propelled, commercial mower is a premium offering for professional landscapers. With reduced weight for better maneuverability, durable construction and lower upfront costs, the Honda HRC216K3HDA is designed with advanced technologies:

• Easy Start, Easy Stop: allows the user to save time by starting the engine while standing behind the mower; the flywheel brake safety system stops the engine and blades when the user lets go of the brake lever on the handle.
• Commercial Grade Power: The fuel-efficient Honda GXV160 commercial engine is the source of powerful, quiet operation.
• Superior Cutting: The exclusive Honda MicroCut® Twin Blade System offers four cutting surfaces to produce finer clippings; the mower can be adjusted to eight heights suitable to all types of grass and mowing conditions.
• Commercial Grade Design: a rugged 21-inch steel deck with front axle and bumper protection for additional structural stability and durability, along with ergonomic, heavy-duty steel piped reinforced handles.

Features

• Honda commercial-grade GXV160 OHV 4-stroke engine
• The easy-starting, powerful, and quiet GXV160 commercial engine is designed for superior reliability. Features include a cast iron cylinder sleeve, two-stage air filter, ball bearing supported crankshaft, electronic ignition and mechanical governor.
• Rugged, durable steel deck
• The 21" heavy duty steel deck is rugged and built to last. Deck guards extend along the sides to increase durability.
• Front bumper
• Provides protection to the deck, as well as a convenient tie-down location. The front axles & the bumper together give added structural stability and durability.
• Maintenance free shaft drive
• An automotive style drive shaft transfers power from the engine to the hydrostatic transmission. Shaft drive is a more efficient transfer of power. And because there are no belts to slip, break or adjust, it’s maintenance free.
• Heavy-duty reinforced handles
• Larger diameter 1" tubing, better supports and stays, and more durable cables.
• Dual Element Air Cleaner
• Provides maximum protection, even in the dustiest conditions. The outer foam can be repeatedly cleaned, which extends the life of the air filter.
• 8 mowing heights (3/4 - 4")
• Suitable for all grass types.
• Large 9" Nexite® wheels
• Strong, lightweight, and easy to replace when necessary.
• Precision sealed ball bearings in all four wheels
• Increases durability and performance. Plus better maneuverability and a smoother ride.
• Large, 2.5 bushel easy-empty grass bag
• Holds more grass, so you can empty it less often.
• Flywheel brake safety system
• Stops the brake when you let go of the handles.
• Manual fuel shut-off valve
• The fuel valve can be shut off for transport, storage, or to performance maintenance.
• Quality cables
• Cables are heavy duty, sealed, and adjustable for maximum performance and durability.

Specs

• Official Model Name
• HRC216K3HDA (CA), HRC216K3HDPH (49 state)
• Carton Label
• HRC2163HDA (CA), HRC2163HDP (49 state)
• Engine
• GXV160
• Deck Material
• Steel – 16 ga
• Cutting Width
• 21"
• Mowing height range
• 3/4"-4"
• Mowing height adjustments
• 8
• Transmission
• Cruise Control (Hydrostatic)
• Ground speed
• 2.1 to 4.0 mph
• Starter
• Recoil
• Choke System
• Manual
• Throttle Control
• Manual
• Drive
• Shaft
• Handle
• 1" Steel Tube
• Steel deck guards
• Standard
• Wheels
• 9" Nexite
• Ball Bearing Wheels
• All
• Standard Functions
• 3 in 1 Capable: Standard Mulch/Bag, Optional Side Discharge
• Bag
• Standard
• Bag capacity (bushels)
• 2.5
• Blade(s)
• Twin blades (MicroCut System®)
• Blade Control
• Flywheel Brake
• Side/Rear Discharge
• Rear Mount Optional
• Fuel tank capacity
• 0.37 gallons
• Dry weight
• 117 lb
• Operating Weight
• 121 lb
• Residential warranty
• 2 years
• Commercial warranty
• 2 years engine, 1 year all other components