DESCRIPTION

The Little Wonder Hydro Brush Cutter navigates through weeds, heavy brush and overgrown vegetation with ease. Our tempered spring steel 26” blade cuts tall weeds, brush and saplings up to 2” thick. Our welded steel frame design and engine positioning provide excellent balance regardless of the terrain. The hydrostatic transmission offers variable speed selection—up to 4.2 mph forward and 1.7 mph reverse. The open differential allows each wheel to operate at different speeds and prevents scuffing when turning a corner.

FEATURES

• Solid rods connect the operator to the transmission and cutter blade clutch – no cables to break or adjust.
• Hydrostatic Transmission offers speeds up to 4.2 mph forward and 1.7 mph reverse
• Wraparound hand guard protects hands when clearing brush along buildings, fences and trees
• 7 – 10 – 12 gauge welded steel engine base, cutting deck, rear frame and control handle construction holds up to the toughest conditions
• Tempered spring steel 26” blade cuts tall weeds, brush, and saplings up to 2” thick
• Adjustable 1.5” wide, .25-inch plate steel skid shoes for excellent flotation over rough terrain.
• 1” diameter mower blade spindle is supported by top and bottom sealed ball bearings inside a machined steel hub, a heavy-duty welded outer steel flange and grease fitting to prevent moisture
• Easy access service points
• Deep welled spindles and single belt pulley system for smooth cutting and easy maintenance

SPECIFICATIONS

• Engine: Honda GXV390
• Displacement (cc): 389
• Fuel Capacity, qt (l): 2.2 (2.1)
• Starter: Recoil
• Max Speed Fwd / Rev, mph (km/h): 4.2 (6.8) / 1.7 (2.7)
• Transmission: Hydro-Gear T2 Transaxle
• Transmission Type: Integrated Hydrostatic Pump / Motor
• Deck Material: Steel
• Cutting Blades / Material Thickness, in (mm): 1 / 0.25 (6.4) Steel
• Cutting Width, in (cm): 26 (66)
• Cutting Height Min / Max, in (cm): 3 (7.6) / 5 (12.7)
• Max Cutting Capacity Diameter, in (cm): 2 (5)
• Max Slope Angle: 20°
• Tires, in (cm): 16 (40.6) Puncture-proof, Bar Tread, Foam-filled
• Assembled Dimensions L x W x H, in (cm): 78 x 32 x 41 (198.1 x 81.3 x 104.1)
• Dry Weight, lbs (kg): 405 (183.7)

Description:

Ready for edging made easy? Put down the shovel, and start up the Little Wonder BedShaper®. This popular unit features a powerful “concave shape” notched blade to slice through soil, producing clean, sharp edges—even “S” curves—at up to 100’ per minute. Blades are highly resistant to chipping, breaking, bending, and delaminating.

Features:

• Convenient hydro-engage/bypass control from operator’s position
• Zero-turning radius easily cuts even small diameter tree rings
• Spring-loaded belt idler provides maintenance-free operation and is fully enclosed in the frame
• Cutting depths from 0.5” to 4.5” controlled by a 7-position gauge wheel
• Self-propelled hydrostatic transmission with powered forward and reverse gets the job done quickly and easily

Specifications:

• Model: 905-00-01
• Engine: Honda GXV390
• Displacement: 389 cc
• Fuel Capacity:
• qt (liters): 2.2 qt (2.1 L)
• Transmission: Hydrostatic, Variable Speed Control (forward and reverse)
• Blade Diameter:
• in (cm): 16.25 in (41.3 cm)
• Material: Heat Treated Spring Steel
• Bearings: Roller (greaseable)
• Frame Material: Steel
• Max Cutting Depth:
• in (cm): 4.5 in (11.4 cm)
• Depth Adjustment Style: 7-Position Gauge Wheel
• Tire Size: 145 / 70 - 6
• Dimensions (L x W x H):
• in (cm): 51 x 43 x 43 in (129.5 x 109.2 x 109.2 cm)
• Weight:
• lbs (kg): 365 lbs (166 kg)
• Replacement Blade: Item 19233
• Optional Shredder Kit: Item 80001SHre

Description: 

Little Wonder Walk Behind Blowers are built to last and are backed by a 5-Year Warranty.

• Kohler Command Pro CH935 engine
• 277 cc
• 1.85 gallon fuel capacity
• Quad clean air cleaner
• Low oil sensor
• Remote Air Flow Control
• 17" dual plane balanced steel impeller with integrated pull ring
• 10" front tire w/tube
• 12" pneumatic tires w/tube

Split-stream air deflector moves piles of leaves farther and faster; without blow-back! You’ll only have to go over the area once.

Larger, lower discharge chute for better blowing power

Remote discharge chute control at your fingertips

Stronger, ergonomic handle design. Height adjustable with anti-vibration grip.

Transport bracket for convenient tie-down during transport

Convenient Lift Handle makes lifting the blower on and off the truck easier

Optional, easy to install, Swivel Wheel Kit. 

Description:

The Power and Strength to Carry Twice the Load of Other Debris Vacuums

• Clears leaves and debris at your pace with the power, performance, and capacity to get the job done.
• Superior airflow provides plenty of suction to fill our large capacity bag so you can collect more debris and get the job done quicker

Features:

• Powered by a Honda® GSV190 engine or Briggs & Stratton® Professional Series™ 850 engine
• Serrated impeller shreds debris down at up to a 5:1 ratio
• Instant nozzle height adjustment at handle provides seamless turf-to-asphalt transition for faster debris and leaf clean-up
• Throated nozzle design increases airspeed, while unique rectangular discharge chute prevents clogging of debris
• Optional Intake Hose Kit for cleaning beds and hard to reach areas; sits securely in special contoured pocket that blocks air flow when not in use
• Thick gauge, all-welded steel housing with welded studs provides years of service
• 40 gallon capacity angled no-kick bag with sewn-in plastic bottom prevents wear-and-tear while in- use and when loading and unloading the vac

Specifications:

• Engine:
• Model: Honda GSV190
• Engine Displacement: 187 cc
• Fuel Capacity: 1 qt (0.09 L)
• Impeller:
• Diameter: 12 in (30.5 cm) Serrated
• Thickness & Material: 0.25 in (0.64 cm) Steel
• Blades / Cutting Points: 5 blades (30 cutting points)
• Bag:
• Material: Mesh
• Capacity: 40 gal (151 L)
• Nozzle:
• Width: 27.5 in (69.9 cm)
• Wheels:
• Front Wheels: 12 in (30.5 cm) rubber tread cap wheels
• Rear Wheels: 12 in (30.5 cm) rubber tread cap wheels
• Dimensions:
• Length x Width x Height: 57 in x 27 in x 43 in (145 cm x 69 cm x 109 cm)
• Weight:
• Weight: 146 lbs (66 kg)

Description:

38% More Air Movement Than the Competition Little Wonder Optimax blowers are the best-designed blowers in the world… known for unmatched leaf-blowing efficiency. Little Wonder Optimax blowers outperform the competition for moving stubborn debris, removing standing water, preparing asphalt or flat roofs for resurfacing, or for any job that requires hurricane-force air! Durable, solid-steel construction… they’re built to last and are backed by a 5-Year Warranty.

FEATURES:

Advanced impeller and aerodynamic design produce the highest airflow in the industry Unique split-stream air deflector moves piles of leaves farther and faster; without blow-back! Large, square discharge chute is low to the ground for better blowing power Scrolled housing ensures consistent, constant airflow even if partially blocked by leaves Continuously welded all-steel impeller and housing for strength and durability you can rely on season after season Remote discharge chute control on the handle at your fingertips Ergonomic handle design; height adjustable with anti-vibration grip Transport bracket for convenient tie-down during transport. Convenient lift handle makes lifting the blower on and off the truck easier. Optional Swivel Wheel Kit for 360° turning 5-Year warranty

SPECIFICATIONS:

Engine: Honda GX270 Displacement: 270cc Fuel Capacity: 1.4 Gal. Impeller (diameter, type): 17,7 blade steel, reverse angle Impeller depth: 2.75" Air Volume: 2260 cfm Air Speed: 143 mph Air Flow Control: Remote

Dimensions

(Height, Width, Length): 43" x 28" x 58" Tires, Front: 10° pneumatic front tire w/ tube Tires, Rear: 12" pneumatic rear tires w/ tube Weight: 142 lbs Warranty: 5 years ENGINE: Displacement 270 cc Engine Type Honda GX270

GENERAL:

Weight 142 lb. Air Velocity 143 mph Air Volume 2260 cfm