Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

The power of a tiger with the swiftness of a cat, the nimble Tiger Cat® II combines the best of both worlds. Making full use of its compact footprint and robust engine, this easily adjustable and extremely durable machine gets into, around and out of tight spaces quickly—putting you on the path toward increased profitability.

48", 52" OR 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Product Dimensions

• 48″ Tiger Cat
• Length: 80″
• Width (chute down): 60.5″
• Width (chute in transport position): 49.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,175 lbs
• 52″ Tiger Cat
• Length: 80″
• Width (chute down): 64.5″
• Width (chute in transport position): 53.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,175-1,180 lbs
• 61″ Tiger Cat
• Length: 80″
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,257-1,277 lbs

GENERAL

• Total Fuel Capacity: 9.5 gallons
• Drive Tires:
• 24″ x 9.5″-12″ (48″ and 52″ models)
• 24″ x 12″-12″ (61″ model)
• Caster Tires: 13″ x 6.5″-6″, flat-free
• Seat: 4-point iso-mounted mid-back mounted on operator-suspension platform

DRIVE SYSTEM

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear 12 cc
• Motors: Parker 14.5 ci
• Forward Ground Speed: 12 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Foot-operated pedal

DECK

• Cutting Widths: Available in 48″, 52″, and 61″
• Type: Velocity Plus™
• Cutting Height: Adjustable from 1″ to 5″ in .25″ increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings.

Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

It’s time for you to rise to the top of the food chain and tame turf with the Turf Tiger II™, a machine that’s tougher than any job you can throw at it. Engineered for superior durability, productivity and comfort, the Turf Tiger II gives you the edge over whatever nature throws at you while leaving you ready to take on the next challenge.

 61" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Product Dimensions:

• 61″ Turf Tiger Gas / Propane / Diesel
• Length: 85.5″
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS down): 46.5″ / 52.5″
• Height (ROPS up): 68″
• Weight: 1,496-1,538 lbs (Gas / Propane) / 1,606 lbs (Diesel) / 1,709 lbs (Diesel)

GENERAL

• Total Fuel Capacity:
• 12 gallons (Gas/Diesel)
• 33.5 lb (LP)
• Drive Tires:
• 26″ x 12″-12″ (61″ and 72″)
• 26″ x 9.5″-12″ (52″)
• Caster Tires: 13″ x 6.5″-6″
• Seat: 4-point iso-mounted torsion-spring suspension seat

DRIVE SYSTEM

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear: 16 cc
• Motors: Parker: 18 ci
• Forward Ground Speed:
• 12 mph (Gas/LP)
• 10 mph (Diesel)
• Reverse Ground Speed: 6 mph
• Parking Brake: Adjustable foot-operated pedal. AUSCO disc brakes.

DECK

• Cutting Widths: 61″
• Type: Velocity Plus™
• Cutting Height: Adjustable from 1.5″ to 6″ in .25″ increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings.

Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Engines

Kohler Command PRO CV224 Engines

With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.

Features include:

• Torque output: 11.0 ft-lbs
• 3-year limited commercial warranty
• Enjoy effortless starts thanks to our Easy-Pull™ technology
• Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
• Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
• Cast-iron cylinder liners add durability and engine protection

Specifications:

Dimensions & Weight

• Length – Transport (handles in upright transport position): 41″ / 44″
• Length – Minimum (handles in highest operating position): 66″ / 69″
• Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
• Tracking Width: 28.75″
• Width (with discharge chute): 36.75″
• Width (with discharge block-off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Maximum Operating: 45.25″
• Height – Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs. / 233 lbs.
• Operating Weight – Mulching: 214 lbs. / 227 lbs.
• Operating Weight – Discharging: 213 lbs. / 226 lbs.

General Specifications

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
• Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel

Drive System

• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 30″
• Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
• Cutting Height: 1.5″ to 5″ in 0.25″ increments
• Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
• Deck Lift: Hand lever, single-point adjustment
• Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)

Discharge, Mulch, & Bagging

• Standard Discharge, Mulch, & Bagging: Yes
• Bag Capacity: 2.5 Bushels

Description:

Because every home deserves stripes, the Liberty® Z is designed and manufactured to deliver a top-of-the-line experience at a homeowner price point. A professionally-constructed mower, fit for your own lawn. The Liberty Z gives more people the chance to see why Scag® machines are Simply the Best.

Other manufacturers opt for less expensive, smaller-capacity, nonadjustable, “disposable” clutches. Not Scag®. Scag PTO clutch brakes are manufactured by Ogura, the world’s best manufacturer of electromagnetic clutches, providing smooth blade engagements and fast blade stops.

All Ogura clutches feature an adjustable air gap. What does that mean to you? It means that when most clutches are worn out and must be replaced at a significant cost to YOU, the Ogura clutch can be easily adjusted to bring it back into specification (your Scag dealer can perform this adjustment).

These clutches also feature industry-leading torque values (the holding power that links the engine to the cutter-deck drive system) to ensure solid drive to the cutter deck and no slipping in heavy conditions.

Features:

Ogura PTO Clutch Brake

• Strong, Adjustable Clutch for Long Life: The Ogura GT1 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck with 74 ft. lb. of holding strength. It features an adjustable air gap for increased durability and longevity.

Deep, Fabricated, and Welded Cutter Decks

• Heavy-Duty Hero Cutter Deck: Designed for superior quality-of-cut, the deep, fabricated deck handles large volumes of grass at high speeds. Heavy-duty aluminum, sealed ball bearing blade-drive spindles ensure reliable performance season after season.

High-Strength Steel Frame

• Solid Design for Years of Dependable Service: The tubular-steel main frame offers unmatched strength and durability for long-term use.

Low-Maintenance Mower Design

• More Uptime: Reduced grease points for increased operator convenience and ease of ownership, minimizing maintenance needs.

Proven Transaxles

• Speeds Up To 7 MPH: The Liberty Z features proven dual hydro transaxles (Tuff Torq TZ450, Hydro-Gear ZT-2800, or ZT-3100, depending on the model) for smooth and solid power delivery to the drive wheels.

Contoured, Bolstered, High-Back Seat

• Ride in Comfort: Ultra-comfortable, adjustable seat (with tools) featuring armrests* for improved comfort. *Armrests are standard on 48″, 52″, and 61″ models; optional for 36″ and 42″ models.

Easy Foot-Pedal Deck Lift

• Easy Up, Easy Down: Spring-assisted foot-pedal cutter-deck lift makes raising and lowering the cutter deck smooth and effortless.

Powerful and Efficient Engine Options

• Reliable Power, Up To 27 HP: A range of proven air-cooled, V-twin engine options available to meet various performance needs.

Specification:

• Description: 42″ Hero Cutter Deck, 22 HP Kohler® 7000 Series™ PRO – 725 cc displacement

Product Dimensions

• Length: 68.5″
• Width (chute down): 54.5″
• Width (chute in transport position): 43″
• Height: 41″
• Weight: 595 lb

General Specifications

• Total Fuel Capacity: 5.5 gallons
• Drive Tires: 20″ x 10″-8″
• Caster Tires: 11″ x 6″-5″
• Seat: Padded with armrests, forward and back adjustment (tools required)
• Drive System Type: Tuff Torq TZ450 Transaxle
• Pumps: Internal Pump: 10 cc
• Motors: Internal Motor: 10cc (Tuff Torq), 16 cc (Hydro-Gear)
• Forward Ground Speed: 7 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 42″
• Type: Heavy-Duty Hero Cutter Deck
• Cutting Height: 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Foot-operated pedal
• Construction: Dual-plate cutter deck constructed of 2 steel plates with a reinforcement plate at cutter deck spindles
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement:
• Ogura GT1 (74 ft-lb) for 36″, 42″, 48″, and 52″ models
• Ogura GT2 (108 ft-lb) for 61″ models
• Adjustable air-gap for extended life

Description:

All business—even at home—the Freedom Z® is perfect for landscapers needing a machine that can go the distance or for the pro-at-home who owns a large-acreage lot. Commercial-quality through and through, this machine is comfortable anywhere the job needs to be done.

Features:

• PTO Clutch Brake:
• Provides excellent starting and stopping power for the cutter deck.
• Offers 74 ft. lb. of holding strength.
• Adjustable air gap for enhanced durability.
• Cutter Deck:
• Deep, fabricated, and welded design for handling large amounts of grass at higher speeds.
• Heavy-duty Hero Cutter Deck construction for quality-of-cut.
• Aluminum, sealed ball bearing, blade-drive spindles for reliable performance.
• Frame:
• Tubular-steel main frame for unmatched strength and longevity.
• Transaxles:
• Hydro-Gear ZT-2800 Transaxles for speeds up to 8 MPH.
• Dual hydro transaxles with all-metal gears and spin-on oil filters.
• Large cooling fans to keep temperatures low and extend component life.
• Maintenance:
• Low-maintenance design with fewer grease points for increased operator convenience and uptime.
• Seat:
• Contoured, bolstered, high-back seat for improved comfort.
• Adjustable with tools and features armrests for added comfort during operation.
• Deck Lift:
• Easy foot-pedal deck lift with spring assistance for smooth raising and lowering of the cutter deck.
• Engine Options:
• Reliable power options up to 24 HP.
• Available with 22 hp and 24 hp Kohler® 7000 Series engines.
• PRO Performance filtration for smooth and consistent power delivery.

Specification:

• Engine: 26 HP Kohler® 7000 Series™ PRO – V-Twin, air-cooled engine.
• Cutter Deck: 52″ Hero Cutter Deck with dual-plate construction using 2 steel plates and a reinforcement plate at cutter deck spindles.
• Blade Engagement: Ogura GT1 PTO Clutch Brake with 74 ft lb holding strength and adjustable air-gap for extended life.
• Cutting Width: 52″
• Cutting Heights: Adjustable from 1.5″ to 4.5″ in 0.25″ increments.
• Deck Lift: Foot-operated pedal for easy adjustment.
• Drive System: Hydro-Gear ZT2800 Transaxle with internal pump (10 cc) and motor (16 cc).
• Speeds: Forward ground speed up to 8 mph, reverse ground speed up to 5 mph.
• Fuel Capacity: 6.5 gallons.
• Tires: Drive tires 20″ x 10″-10″, caster tires 11″ x 6″-5″.
• Seat: Padded with armrests, adjustable forward and back (tools required).
• Dimensions:
• Length: 73″
• Width (chute down): 64.5″
• Width (chute in transport position): 53″
• Height: 60″
• Weight: 765 lb

Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

All business—even at home—the Freedom Z® is perfect for landscapers needing a machine that can go the distance or for the pro-at-home who owns a large-acreage lot. Commercial-quality through and through, this machine is comfortable anywhere the job needs to be done.

Features:

• PTO Clutch Brake:
• Provides excellent starting and stopping power for the cutter deck.
• Offers 74 ft. lb. of holding strength.
• Adjustable air gap for enhanced durability.
• Cutter Deck:
• Deep, fabricated, and welded design for handling large amounts of grass at higher speeds.
• Heavy-duty Hero Cutter Deck construction for quality-of-cut.
• Aluminum, sealed ball bearing, blade-drive spindles for reliable performance.
• Frame:
• Tubular-steel main frame for unmatched strength and longevity.
• Transaxles:
• Hydro-Gear ZT-2800 Transaxles for speeds up to 8 MPH.
• Dual hydro transaxles with all-metal gears and spin-on oil filters.
• Large cooling fans to keep temperatures low and extend component life.
• Maintenance:
• Low-maintenance design with fewer grease points for increased operator convenience and uptime.
• Seat:
• Contoured, bolstered, high-back seat for improved comfort.
• Adjustable with tools and features armrests for added comfort during operation.
• Deck Lift:
• Easy foot-pedal deck lift with spring assistance for smooth raising and lowering of the cutter deck.
• Engine Options:
• Reliable power options up to 24 HP.
• Available with 22 hp and 24 hp Kohler® 7000 Series engines.
• PRO Performance filtration for smooth and consistent power delivery.

Specification:

• Engine: 26 HP Kohler® 7000 Series™ PRO – V-Twin, air-cooled engine.
• Cutter Deck: 52″ Hero Cutter Deck with dual-plate construction using 2 steel plates and a reinforcement plate at cutter deck spindles.
• Blade Engagement: Ogura GT1 PTO Clutch Brake with 74 ft lb holding strength and adjustable air-gap for extended life.
• Cutting Width: 52″
• Cutting Heights: Adjustable from 1.5″ to 4.5″ in 0.25″ increments.
• Deck Lift: Foot-operated pedal for easy adjustment.
• Drive System: Hydro-Gear ZT2800 Transaxle with internal pump (10 cc) and motor (16 cc).
• Speeds: Forward ground speed up to 8 mph, reverse ground speed up to 5 mph.
• Fuel Capacity: 6.5 gallons.
• Tires: Drive tires 20″ x 10″-10″, caster tires 11″ x 6″-5″.
• Seat: Padded with armrests, adjustable forward and back (tools required).
• Dimensions:
• Length: 73″
• Width (chute down): 64.5″
• Width (chute in transport position): 53″
• Height: 60″
• Weight: 765 lb

Description:

IN STOCK UNITS ONLY - Sales Ends 10/31/2025

Featuring a comfortable operator platform with first-class suspension that minimizes fatigue, the V-Ride II™ delivers a natural, intuitive and smooth riding position the entire day. With unrivaled performance, stability and durability, this machine helps keep you in tip-top condition to get the job done day after day, year after year.

48", 52" or 61" Cutting Width

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48″, 52″ and 61″ widths. An Advantage Cutter Deck is featured on 32″ and 36″ widths

Scag® cutter decks have always given our competition a serious case of deck envy. Many try to duplicate the performance, but none can match it. The Velocity Plus™ cutter deck is an outstanding performer and delivers beautiful results.

The Velocity Plus™ Cutter Deck provides the unmatched power, precision and performance professionals demand. This revolutionary deck design delivers high-velocity discharge plus a beautiful manicured cut, even at faster ground speeds. A redesigned cutting chamber and massive discharge opening provide even greater cutting performance with maximum clipping dispersal in any conditions.

Strength — Scag’s tough cutter-blade spindles and Tri-Plate construction ensure solid performance and long life. A replaceable trim-side wear pad protects deck from damage.

Productivity — An extra-large discharge opening, paired with the Turbo Baffle, enhances discharge for even clipping dispersal.

Flexibility — The Velocity Plus cuts everything from fine grasses to tough weeds. The Custom-Cut™ Front Baffle System allows you to customize the deck to your individual conditions for even more productivity and higher performance.

Engines:

Kawasaki FT Series Engines

Commercial-Grade Power

The new Kawasaki® FT Series engines with patented Vortical air filtration blaze new trails.

Kawasaki® FT Series engines are designed and built to handle heavy loads. The Vortical air filtration system muscles out grass and debris while large, easy-to-access integrated clean-out ports amp up your efficiency and keep you cutting.

Other features include:

• 90° V-twin
• High-efficiency, centrifugal air intake system
• Dual-element air filtration with reinforced filter
• Large, easy-to-access integrated clean-out ports
• Pressurized lubrication system
• Electronic spark ignition
• Automatic compression release
• Internally vented carburetor with fuel shut-off solenoid
• Cast-iron cylinder liners

Specification:

• Specification - V-Ride II
• General:
• Total Fuel Capacity:
• 5 gallons (32″)
• 6.75 gallons (36″)
• 8 gallons (48″, 52″, and 61″)
• Drive Tires:
• 20″ x 6.5″-10″ (32″)
• 20″ x 8″-10″ (36″)
• 24″ x 9.5″-12″ (48″ and 52″)
• 24″ x 12″-12″ (61″)
• Caster Tires:
• 11″ x 4″-5″ (32″ and 36″)
• 13″ x 5″-6″ (48″ and 52″)
• 13″ x 6.5″-6″ (61″)
• Seat: Extra-large comfort cushion
• Drive System:
• Drive System Type: Dual Pump and Motor
• Pumps:
• Hydro-Gear 10 cc (32″ and 36″)
• Hydro-Gear 12 cc (48″, 52″, and 61″)
• Motors:
• Parker 12 ci (32″ and 36″)
• Parker 14 ci (48″, 52″ and 61″)
• Forward Ground Speed:
• 8.5 mph (32″ and 36″)
• 10.5 mph (48″, 52″ and 61″)
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever
• Deck:
• Cutting Widths: 32″, 36″, 48″, 52″, and 61″
• Type:
• Advantage (32″ and 36″)
• Velocity Plus™ (48″, 52″, and 61″)
• Cutting Height: 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles. 32″ model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement:
• Ogura GT2.5 (150 ft lb) – (32″, 36″, 48″, and 52″)
• Ogura GT3.5 (250 ft lb) – (61″)
• Adjustable air-gap for extended life.
• Length: 69.5″
• Tracking Width: 48″
• Width (Chute Down): 65.25″
• Width (Chute in Transport Position): 53.75″
• Height: 47.25″
• Weight: 1,000-1,022 lb

Description:

(SFC-21-7CV)

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

Specifications:

• Engine: 7HP @ 3300 RPM, 4 cycle gas, OHV, air-cooled, single-cylinder, vertical shaft
• Transmission: GT MG 512 transmission, 3-speed
• Wheels/Tires: Drive: 10.5 x 3 / Front: 9 x 2.25
• Handle Bars: 1″ diameter, thick wall tubing, 3-position adjustable
• Safety Group: Handle actuated operator presence system
• Forward Speed: Up to 4.25 mph
• Cutting Width: 21 inches (53.34 cm)
• Cutting Height Adjustment: 1.5″ to 4.5″ in 0.5″ increments
• Cutter Blade: 0.1345 in. thick, milled edge, wear resistant

Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Engines

Kohler Command PRO CV224 Engines

With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.

Features include:

• Torque output: 11.0 ft-lbs
• 3-year limited commercial warranty
• Enjoy effortless starts thanks to our Easy-Pull™ technology
• Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
• Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
• Cast-iron cylinder liners add durability and engine protection

Specifications:

Dimensions & Weight

• Length – Transport (handles in upright transport position): 41″ / 44″
• Length – Minimum (handles in highest operating position): 66″ / 69″
• Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
• Tracking Width: 28.75″
• Width (with discharge chute): 36.75″
• Width (with discharge block-off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Maximum Operating: 45.25″
• Height – Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs. / 233 lbs.
• Operating Weight – Mulching: 214 lbs. / 227 lbs.
• Operating Weight – Discharging: 213 lbs. / 226 lbs.

General Specifications

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
• Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel

Drive System

• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 30″
• Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
• Cutting Height: 1.5″ to 5″ in 0.25″ increments
• Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
• Deck Lift: Hand lever, single-point adjustment
• Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)

Discharge, Mulch, & Bagging

• Standard Discharge, Mulch, & Bagging: Yes
• Bag Capacity: 2.5 Bushels