Description:

Brains and brawn come together in this well-rounded professional chainsaw. The MS 362 C-M features the same great power, weight, and fuel efficiency as the MS 362, but it also features exclusive STIHL M-Tronic™ engine management technology. This innovative microprocessor-controlled engine management system optimizes engine performance and compensates for changes in operating conditions, such as temperature, elevation, fuel quality, and dirty air filters. It makes sure you’re working with optimal cutting power in any cutting condition.

Features:

• STIHL M-Tronic™ - This product features STIHL M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high-speed carburetor adjustment screws, compensates for dirty air filters and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in airflow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL® chainsaws are equipped with a chain-stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve,' vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.35 lbs.
• Guide Bar Length (Recommended): 25 in.
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz.
• Engine Power: 4.7 bhp
• Fuel Capacity: 20.3 oz.
• Displacement: 59.0 cc
• Intended Use: Professional

Note: STIHL® recommends #3624 (33 RS3-72) OILOMATIC® Saw Chain and 20” 3003 008 8921 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. Compatible guide bar ranges: 16" to 25".

Description: 

For quick and easy home maintenance, trust the Husqvarna 435. This robust gas saw features Smart Start® technology and air purge to deliver best-in-class starting performance.* Our proprietary X-TORQ® engine delivers superior performance, increased fuel efficiency and low emissions. And LowVib® technology makes this saw comfortable to use, even in demanding conditions.

Specifications:

Engine:

• Chain Speed at Max Power: 56.76 feet per second
• Cylinder Displacement: 40.9 cm³
• Output Shaft Power: 2.2 hp
• Clutch Engagement Speed: 4,300 rpm (±120)
• Electrode Gap: 0.02 inches
• Idling Speed: 2,900 rpm
• Ignition Module Air Gap: 0.01 inches
• Maximum Power Speed: 9,000 rpm
• Oil Pump Type: Fixed flow

Equipment:

• Recommended Bar Length:
• Minimum: 13 inches
• Maximum: 18 inches
• Chain Type: H30
• Bar Length: 16 inches (40 cm)
• Sprocket Type: Spur 7
• Pitch: .325"
• Gauge: .050"

Dimensions:

• Weight (Excluding Cutting Equipment): 9.78 lbs

Sound and Noise:

• Sound Pressure Level at Operator's Ear: 102 dB(A)
• Sound Power Level, Guaranteed (LWA): 114 dB(A)
• Sound Power Level, Measured: 113 dB(A)

Vibration:

• Equivalent Vibration Level (ahv, eq) Rear Handle: 3.8 m/s²
• Equivalent Vibration Level (ahv, eq) Front Handle: 3.1 m/s²

Lubricant:

• Oil Tank Volume: 0.53 US pint

Emission:

• Exhaust Emissions (CO₂ EU V): 813 g/kWh

Description:

The MS 182 is a powerful, easy-to-use homeowner chainsaw that gives you performance you can depend on. This chainsaw is equipped with Toolless Fuel and Oil Caps with Retainers™, offering a simple and convenient method to tighten and loosen oil caps without the use of tools. Featuring a Master Control Lever™ and an anti-vibration system, the MS 182 is designed to reduce fatigue while offering more control and maneuverability, making it the ideal tool for woodcutting tasks around the home.

Features:

• Diagnostic Socket - The convenient diagnostic socket makes it easy for a local STIHL® Dealer to plug in the chainsaw and access information about operating time, diagnostic support, and more.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• STIHL OILOMATIC® Saw Chain - The chain features specially engineered grooves designed to channel oil to critical wear areas.
• Reduced Exhaust Emissions - This product features reduced exhaust emissions allowing users to make less of an impact on their surroundings.
• Front Hand Guard - The hand guard is designed to reduce the risk of injury.
• Rear Hand Guard - The hand guard is designed to reduce the risk of injury and provide a wide area for foot placement during starting.
• Translucent Fuel Tank - The semi-transparency allows operators to easily check the fuel level before starting work.
• Easy-Access Air Filter Cover - The provided easy-access makes it almost effortless to remove the cover for fast filter cleaning or replacement.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Spark Arrester Muffler - Large baffles reduce noise level and contain a screen designed to reduce the emission of sparks.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.

Specifications:

• Power Source: Gas
• Weight: 10.1 lbs
• Recommended Bar Length: 16 inches
• Chain Type: 3/8" PM3 (OILOMATIC®)
• Chain Oil Capacity: 9.5 oz
• Engine Power: 2.0 HP
• Fuel Capacity: 13.5 oz
• Displacement: 35.8 cc
• Best For: Homeowner use

Description:

Accomplish everything from felling to limbing with the MSA 220 C-B, featuring 250 watts more power than the previous model. Plus, experience increased maneuverability with the Light 04 guide bar and smooth-cutting performance with the 3/8” STIHL PICCO™ PM3 saw chain. Lightweight with zero exhaust emissions, this AP Professional System chainsaw offers up to 40 minutes of run time when paired with the AP 300 S battery. The brushless motor allows for fast acceleration and low maintenance, so you can enjoy powerful performance and maximum efficiency.

Run time may vary based on battery type, charge level and capacity, model, operating style, and conditions. Batteries and chargers can be purchased separately or as a combined set with tool.

Features:

• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Raised and Printed Felling Stripe - The raised and printed felling stripe allows for precise aiming of felling direction.
• Brushless Motor - The advanced brushless motor virtually eliminates maintenance while supplying the power and performance you expect from STIHL.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Magnesium Motor Housing - The magnesium motor housing provides added durability to this powerful chainsaw.
• Captive Bar Nut - The captive bar nut is held securely in place, which eliminates the risk of dropping or losing the bar nut during saw chain maintenance.
• Variable-Speed Trigger - The variable-speed trigger allows precise control for each task.
• Rubberized Soft-Touch Handle - Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods. 
• Low Oil Sensor - The low oil sensor allows the operator to see when the oil is low so they can keep the bar and chain properly lubricated.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Battery
• Powerhead Weight: 6.8 lbs.
• Weight (w/ AP 300 S): 12.2 lbs.
• Guide Bar Length (Recommended): 16 in.
• OILOMATIC® Chain: 3/8" STIHL PICCO™ Super
• Chain Oil Capacity: 7.1 oz.
• Battery System: AP System
• Run Time (w/ AP 300 S): Up to 40 min.
• Voltage: 36 V
• Intended Use: Professional

Description:

The MS 271 FARM BOSS® chainsaw is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refuelings—while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design—now that’s high performance.

Features:

• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System – This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner – The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System – STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ – The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock – This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings – Housings are lightweight, durable, and corrosion resistant.
• Powerful Low Exhaust Emission Engine – A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America – A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.49 bhp
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

Designed with an updated modern look, the MS 182 C-BE is a STIHL® gasoline-powered chainsaw that homeowners can count on. The MS 182 C-BE is built with more power than the MS 172 C-E. Its lightweight design helps reduce your fatigue when using the product for an extended period without forfeiting the powerful performance that you have come to trust from STIHL®. The chainsaw’s 16-inch Light 04 guide bar consists of three metal plates electrically welded together for a lightweight yet stable feel, and a narrow bar nose is designed to help reduce kickback. Equipped with a Quick Chain Adjuster and STIHL Easy2Start™ technology, the MS 182 C-BE is designed for homeowners to get to work quicker when taking on woodcutting tasks around the home.

Features:

• STIHL Easy2Start™ (E) - The STIHL Easy2Start™ system makes starting STIHL® outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL® products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• STIHL Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL OILOMATIC® Saw Chain - The chain features specially engineered grooves designed to channel oil to critical wear areas.
• Diagnostic Socket - The convenient diagnostic socket makes it easy for a local STIHL® Dealer to plug in the chainsaw and access information about operating time, diagnostic support, and more.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Powerful, Yet Lightweight - Built for lightweight durability and packed with features, this powerful chainsaw is ideal for frequent use and tasks around the home.
• Front Hand Guard - The hand guard is designed to reduce the risk of injury.
• Rear Hand Guard - The hand guard is designed to reduce the risk of injury and provide a wide area for foot placement during starting.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Easy-Access Air Filter Cover - The provided easy-access makes it almost effortless to remove the cover for fast filter cleaning or replacement.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Purge Pump Primer - The purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Translucent Fuel Tank - The semi-transparency allows operators to easily check the fuel level before starting work.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Spark Arrester Muffler - Large baffles reduce noise level and contain a screen designed to reduce the emission of sparks.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.
• Reduced Exhaust Emissions - This product features reduced exhaust emissions allowing users to make less of an impact on their surroundings.

Specifications:

• Weight: 10.8 lbs
• Bar Length: 16"
• Chain: 3/8" PM3 (low-kickback)
• Oil Capacity: 9.5 oz
• Power: 2.0 HP
• Fuel Capacity: 13.5 oz
• Engine Size: 35.8 cc

Description:

The MS 251 WOOD BOSS® chainsaw is designed to deliver all the power you’d expect from STIHL® equipment with a comfortable and ergonomic design. The MS 251 WOOD BOSS® is perfect for felling small trees, pruning and thinning, and cutting firewood simply and efficiently. With up to a 20 percent increase in fuel savings and a 50 percent reduction in exhaust emissions—when compared to previous models—you can enjoy a longer run time while feeling good about your impact on the environment. Features like a Master Control Lever™ and reduced vibration make the MS 251 WOOD BOSS® a lean, easy-to-use machine that still packs plenty of power.

Features:

• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Weight: 11.0 lbs
• Recommended Bar Length: 18 inches
• Chain Type: .325" RM3 (OILOMATIC®)
• Chain Oil Capacity: 6.7 oz
• Engine Power: 3.0 HP
• Fuel Capacity: 13.2 oz
• Displacement: 45.6 cc
• Best For: Homeowner use

Description:

No pulling on cords, fuel mixing, or complicated startup procedures with the MSA 200 C-B chainsaw. Just squeeze the trigger and start cutting. In addition to easy starting, battery-powered tools in the STIHL AP System produce zero exhaust emissions and are quieter than their gas-powered counterparts, making them an ideal choice for areas with emission or noise restrictions. Powered by an interchangeable STIHL lithium-ion battery, this chainsaw delivers the speed, cutting capacity, and run time to take on just about any cutting job. The STIHL MSA 200 C-B is a battery-powered chainsaw tough enough to carry the name STIHL.

Run time may vary based on battery type, charge level and capacity, model, operating style, and conditions. Batteries and chargers can be purchased separately or as a combined set with tool.

This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.

Features:

• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Variable-Speed Trigger - The variable-speed trigger allows precise control for each task.
• Rubberized Soft-Touch Handle - Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods. 
• Toolless and Translucent Bar and Chain Oil Tank - The translucent bar and chain oil tank makes it easy for users to check oil levels at a glance.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Battery
• Powerhead Weight: 8.2 lbs.
• Weight (with AP 300): 12.2 lbs.
• Guide Bar Length (Recommended): 14 in.
• OILOMATIC® Chain: 3/8" STIHL PICCO™
• Chain Oil Capacity: 7.1 oz.
• Battery System: AP System
• Run Time (with AP 300): Up to 50 min
• Voltage: 36 V
• Intended Use: Professional